User:Cegaiel/Macros/Crematory/SACFAR

// This currently works for my screen resolution 1024:768 with ATITD in full screen
// Pin the crematory window in the upper left of the screen as far into the corner as possible
// Load with stuff manually and make sure the window is fully refreshed so that the 
// "fire crematory" button appears and there is no slider bar!

// Start the macro - it will click the fire button which will also bring ATITD to the top
// Once the crematory has finished go back to ACTOOL and stop the macro - it currently just 
// has a huge crude loop - it would be relatively easy to monitor the progress bar but I 
// haven't done that yet

// For different screen resolutions I guess use "pixie" or something similar to get coords
// Need to change slider and button numbers under slider control for your particular crematory
// (The wiki explains how to analyse your crematory)

//SACFAR:
//Sliders numbered left-to-right 1-7.
//Buttons labeled left-to-right 1-5.

//Button 1 -> 3, 7
//Button 2 -> 1
//Button 3 -> 2
//Button 4 -> 5, 6
//Button 5 -> 4



	Constants 

		//These settings will work on 1024x768. Only change these it you want it work at a different resolution.

		// Vertical position of middle of slider bar
		midSlider = 286
		// Horizontal positions of seven slider bars
		hrzSlider1 = 30
		hrzSlider2 = 66
		hrzSlider3 = 102
		hrzSlider4 = 138
		hrzSlider5 = 174
		hrzSlider6 = 210
		hrzSlider7 = 246
		// Vertical position of button centres
		vrtButton = 365
		// Horizontal positions of five button centres
		hrzButton1 = 57
		hrzButton2 = 97
		hrzButton3 = 137
		hrzButton4 = 177
		hrzButton5 = 217

		//Leave these alone
		count = 0
		counthi = 0
		countlo = 0
		clickflag = 0
		flag = 1
		posSlider1 = 0
		posSlider2 = 0
		posSlider3 = 0
		posSlider4 = 0
		posSlider5 = 0
		posSlider6 = 0
		posSlider7 = 0
		comSlider1 = 0
		comSlider2 = 0
		posSlider1old = 0
		posSlider2old = 0
		posSlider3old = 0
		posSlider4old = 0
		posSlider5old = 0
		posSlider6old = 0
		posSlider7old = 0
	END

// Clicks to fire the crematory (need to specify centre of fire button)
mousepos 62, 91
delay 150
LeftClick

// First call to obtain initial positions of sliders
call GETSLIDERPOS
Compute posSlider1old = $posSlider1
Compute posSlider2old = $posSlider2
Compute posSlider3old = $posSlider3
Compute posSlider4old = $posSlider4
Compute posSlider5old = $posSlider5
Compute posSlider6old = $posSlider6
Compute posSlider7old = $posSlider7

// Crude loop at the moment. Should really monitor the progress bar. 

loop 250

	call GETSLIDERPOS

// One slider per button control
// Need to alter slider and button numbers for particular crematory


//1st single slider/button combo:

	if $posSlider2 > 0
		if $posSlider2 > $posSlider2old
			mousepos $hrzButton3,$vrtButton
			delay 150
			LeftClick
		END
	END
	if $posSlider2 < 0
		if $posSlider2 < $posSlider2old
			mousepos $hrzButton3,$vrtButton
			delay 150
			LeftClick
		END
	END


//2nd single slider/button combo:

	if $posSlider4 > 0
		if $posSlider4 > $posSlider4old
			mousepos $hrzButton5,$vrtButton
			delay 150
			LeftClick
		END
	END
	if $posSlider4 < 0
		if $posSlider4 < $posSlider4old
			mousepos $hrzButton5,$vrtButton
			delay 150
			LeftClick
		END
	END


//3rd single slider/button combo:

	if $posSlider1 > 0
		if $posSlider1 > $posSlider1old
			mousepos $hrzButton2,$vrtButton
			delay 150
			LeftClick
		END
	END
	if $posSlider1 < 0
		if $posSlider1 < $posSlider1old
			mousepos $hrzButton2,$vrtButton
			delay 150
			LeftClick
		END
	END

// Two sliders per button control (use centre of mass, i.e. average)
// Need to alter slider and button numbers for particular crematory
//Note Editing a slider number is $posSlider#, not comSlider#. Do not change the 1 or 2 on $comSlider1 and $comSlider2

//1st two slider/one button combo:

	Compute comSlider1 = ($posSlider3 + $posSlider7)/2
	if $comSlider1 > 0
		Compute clickflag = 0
		if $posSlider3 > $posSlider3old
			Compute clickflag = 1
		END
		if $posSlider7 > $posSlider7old
			Compute clickflag = 1
		END
		if $clickflag = 1
			mousepos $hrzButton1,$vrtButton
			delay 150
			LeftClick
		END
	END
	if $comSlider1 < 0
		Compute clickflag = 0
		if $posSlider3 < $posSlider3old
			Compute clickflag = 1
		END
		if $posSlider7 < $posSlider7old
			Compute clickflag = 1
		END
		if $clickflag = 1
			mousepos $hrzButton1,$vrtButton
			delay 150
			LeftClick
		END
	END


//2nd two slider/one button combo:

	Compute comSlider2 = ($posSlider5 + $posSlider6)/2
	if $comSlider2 > 0
		Compute clickflag = 0
		if $posSlider5 > $posSlider5old
			Compute clickflag = 1
		END
		if $posSlider6 > $posSlider6old
			Compute clickflag = 1
		END
		if $clickflag = 1
			mousepos $hrzButton4,$vrtButton
			delay 150
			LeftClick
		END
	END
	if $comSlider2 < 0
		Compute clickflag = 0
		if $posSlider5 < $posSlider5old
			Compute clickflag = 1
		END
		if $posSlider6 < $posSlider6old
			Compute clickflag = 1
		END
		if $clickflag = 1
			mousepos $hrzButton4,$vrtButton
			delay 150
			LeftClick
		END
	END


	Compute posSlider1old = $posSlider1
	Compute posSlider2old = $posSlider2
	Compute posSlider3old = $posSlider3
	Compute posSlider4old = $posSlider4
	Compute posSlider5old = $posSlider5
	Compute posSlider6old = $posSlider6
	Compute posSlider7old = $posSlider7

END

// Procedure to find slider positions

Procedure GETSLIDERPOS
	
	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider1, $midSlider
			Compute posSlider1 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 6
		IsBlack $hrzSlider1, $counthi
			Compute posSlider1 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 6
		IsBlack $hrzSlider1, $countlo
			Compute posSlider1 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider2, $midSlider
			Compute posSlider2 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 6
		IsBlack $hrzSlider2, $counthi
			Compute posSlider2 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 6
		IsBlack $hrzSlider2, $countlo
			Compute posSlider2 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider3, $midSlider
			Compute posSlider3 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 6
		IsBlack $hrzSlider3, $counthi
			Compute posSlider3 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 6
		IsBlack $hrzSlider3, $countlo
			Compute posSlider3 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider4, $midSlider
			Compute posSlider4 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 6
		IsBlack $hrzSlider4, $counthi
			Compute posSlider4 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 6
		IsBlack $hrzSlider4, $countlo
			Compute posSlider4 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider5, $midSlider
			Compute posSlider5 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 6
		IsBlack $hrzSlider5, $counthi
			Compute posSlider5 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 6
		IsBlack $hrzSlider5, $countlo
			Compute posSlider5 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider6, $midSlider
			Compute posSlider6 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 6
		IsBlack $hrzSlider6, $counthi
			Compute posSlider6 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 6
		IsBlack $hrzSlider6, $countlo
			Compute posSlider6 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider7, $midSlider
			Compute posSlider7 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 6
		IsBlack $hrzSlider7, $counthi
			Compute posSlider7 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 6
		IsBlack $hrzSlider7, $countlo
			Compute posSlider7 = $midSlider - $countlo
			Compute flag = 0
		END
	END

END