User:Jimbly/AutomaticThistles

Below is the process I would recommend for starting to make thistles:

Prerequisite: Understand the basics

Using the information on the Thistle page and related guides, you should:

1. Understand Thistle types (e.g. A-B-C+F~N~P+T+) and Thistle requirements (e.g. A-C+N~P+)
2. Be able to use ThistleSim.xls to simulate a recipe and see the results
3. Generate a simple recipe (try to make anything other than A-B-C-F-N-P-T-) and run it by hand on a single Thistle Garden
4. Understand what a "void" is (a rule that is not active for an in-game week (~2.5 real days)
5. Be confused as to how anyone makes all of their complicated recipes by hand (optional)

In order to be most productive, I would also expect you to have access to:

1. Multiple Silkworm Farms (I am generally tracking 10-20, only a subset of these have requirements that can be made any given week), though this approach will work even if you have just 1 or 2.
2. Around 20 Thistle Gardens (there are numerous public arrays of Thistle Gardens you can use, you shouldn't need to build these yourself).

Install VeggieTales

Download and install VeggieTales from here. VeggieTales is my macroing program, with some other fun tools (like the Thistle Recipe Generator) built in as well. Currently this is on Windows only, but I can provide almost-portable source code for anyone who is interested in helping port it to Linux/MacOS, just ask.

Enter your requirements

Open up config_thistle.txt (in the VeggieTales installation directory), and you will find a list of desired requirements. You should remove the existing ones in there (they are probably whatever I was looking for when I last made a build), and replace them with your own. You can have blocks of requirements with different labels to make the output easier to read, e.g.:

desired "label:My farms"
desired A+B+C+F+
desired B-C+F+T~
desired "label:Guild farms"
desired C-F+N~T+

Generate no-void recipe(s)

Near the top of thistle_config.txt there will be a bunch of lines indicating each of the rules and whether they are on or off. Change all of these to "1" to enable the rules. Then, launch VeggieTales, and click Thistle Mode. This will churn away for a while, and after 40 ticks will have written out a history.txt file containing any recipes found (with no voids, it will find recipes for most requirements).

Open history.txt, and scroll down to the bottom, and find a requirement you're looking for, there will be a line like:

Best for A+B+C+F+: 1000/17 (D)

The two numbers are how many actions (water in this case) must be done to run this recipe, one number being how many if it's run at night, the other during the day, with 1000 indicating it did not find a recipe. In this case, this recipe can only be run during the day (also indicated by the (D)).

Search upwards in the file for the previous occurrence of your requirement, and it will be the best recipe it wrote out (it may have written multiple, and if there is one for each day and night, then search to find one which has an appropriate sun value).

Reading the recipes

The first of what is in history.txt is a full history of every action that was done and the state at each tick, which is mostly useful only when debugging a broken recipe. Below that is a bunch of lines like:

0,0,1,0,33
0,0,0,0,33
0,0,0,2,99
0,0,1,0,99

These are the actual recipe. The can be copy and pasted directly into ThistleSim (the 41 lines and 5 columns for inputs), and also into a macro to run the recipe.

Verify your recipe

Copy the recipe into ThistleSim and make sure the output is what you'd expect (note that ThistleSim might erroneously say the final result is a "-" when it's really a "~" if a value is in the range of 20.01-22). Leave ThistleSim open (on another monitor or another computer is best!) for comparison to what actually happens in game.

Run a recipe via macro

Now you want to actually run your recipe on a thistle garden! If the recipe is cheap (only sun/water, which they should be if you've been following this tutorial so far), you may want to run it on multiple thistle gardens (though if something goes wrong and you need to abort them all, that can be annoying). I generally just run 1 or 2 thistle gardens when testing a new recipe.

Open luaScripts/thistle_custom.lua in any text editor. Near the top are a few values to change, specifically the number of gardens you have open, the current sun value on those gardens (if it's night, set it to 0, if it's daytime and the lid is open, set it to 99, if it's daytime and it's closed, set it to 33 - all gardens must be in the same state), and the instructions to run the recipe. Paste the recipe over the one that already exists in the macro.

TODO: how to run it

Determine voids

If someone else has already determined the voids for this week, you can simply jump ahead and enter the voids into the config file. Generally those who determine the thistle voids place the information in their info text. Try /info Jimbly or /info Ephemere to see if we have the voids for this week.

When you are watching your recipe run, compare the results happening in-game with the results you see in ThistleSim. If you don't have two computers side-by-side, you may want to save screenshots every 8 ticks or so. If there is a tick in which the results differ, you need to determine which rule, when voided, would cause that result. The way I do this is to go down the list of rules, and try turning each one off and then back on. Generally, one of 3 things will happen:

1. Nothing will change, or only later ticks will change - we gain no information about this rule
2. One of the earlier ticks will change - we now know this rule must be active, flag it (I just put a comment in the column to the right of the rule), and you know you don't need to test it later
3. The tick which differed will change to be what you see in-game - we now know this rule must be voided.

It's possible that no single rule will get the result you saw in-game, in which case it might be a pair of 2 rules voided, both active on the same tick, causing the result. By looking at what actual vitamins differ, and what rules cause/create them, you should be able to logic out what pair of rules it is, but this is less common.

Repeat this process until the results in ThistleSim look exactly like what happened in game.

If the results were identical, you have found all of the voids (or, at least, the ones which will affect your current recipe), move on to making them in bulk!

Enter voids and generate recipe(s) again

Chances are, if you found a new void, your recipe did not make the thistles you were looking for. Enter the voids into config_thistle.txt (there should be a 0 next to each rule with is voided, 1 next to each which is active, just like in ThistleSim), and generate recipes again.

Profit

(but not too much, help out your neighbors as well, please)