The Wiki for Tale 4 is in read-only mode and is available for archival and reference purposes only. Please visit the current Tale 11 Wiki in the meantime.
If you have any issues with this Wiki, please post in #wiki-editing on Discord or contact Brad in-game.
User:TamBlack/Macros
From A Tale in the Desert
Jump to navigationJump to search//Charcoal Hearth
//
// Make sure TAKE is NOT an option!! Only use SETUP option ONCE!!
//
// I've made some improvements to the Hearth macro. Depending on your resolution,
// the macro will run up to 12 guilded hearths. I've tested it in 1280x960
// resolution without any need to change values. It may work in other resolutions
// also but I have not been able to test it. If you are using personal hearths,
// it will run up to 10 in 1280x960. Maximum number in 1024x768 is 8.
//
// Setup: I've added a setup routine to the macro. Pin the windows on top of each
// other in the top left corner. I suggest at least 200 wood per hearth
// and about 15 water per hearth to be safe. All hearths are slightly
// different but I suggest that you put your fastest burning hearths first
// in line. You can tweak the settings in the built in menu.
//
// Hearths: Total number of hearths you are running.
// Hearths Across: How many Hearths on the top row of windows. Make sure
// you set this each time even if you are running 1 hearth.
// Variables in the macro are set off of this number.
// Guilded?: Check this box if you are using guilded hearths.
// Need Setup?: Check this box if you need the macro to position your
// windows that are stacked in top left corner. This is
// usefull if you run another round on the hearths and your
// windows are set up already. Check if needed or not.
// Stealth Mouse: Check this if you don't want to see the mouse move around
// on the hearth windows. When checked, it will save your
// mouse position, move to the spot it needs, perform its
// action then return the pointer to where it started. Alows
// you to change chat windows are dig in chest while the
// macro is running :)
// Heat: Threshold for Heat bar, increase or decrease as needed. If heat
// reaches this lvl, water will be added.
// Wood: Wood threshold, adds wood up to this point.
// Water: Alowable water level, not much play here. If the water lvl is above
// this lvl, water will not be added. Prevents drowning the hearth.
// RGBGreen: Used to detect completion bar. If the macro adds a bunch of water
// before the macro is done then moves to the next hearth, increase
// this number. Or lower it if it doesnt see green.
// RGBBlue: Works just like RGBGreen but for blue bars. If the macro keeps
// adding wood till the hearth is full, it's not seeing blue. If
// this happens, lower this number. Other problem may be that the
// mouse pointer is not lining up over the bar correctly. Run the
// Mouse Test.
// Check Bars Interval: This is the pause time between bar checks. The
// default value of 4000 works well for 1-8 hearths
// but you may need to decrease this number if you
// are running more than 8.
// Mouse Test: This is to test if the mouse pointer is lining up correctly
// with your windows. Run 1 hearth manually and start the macro
// with this option checked. You don't need to worry about any
// other option. It will move over the Heat, Wood, Water, Danger,
// and Status bar then over the Wood and Water buttons 10 times
// before it stops. If these positions are off a bit, you can
// change the Y coordinates below in the constants section.
//
// The macro doesn't watch Oxygen. I was going to add a vent option but this
// macro runs very well and never fails for me. If your oxygen is getting too
// high, try adding more wood. But, by adding more wood, you add more heat
// which may require you adding more water. A small amount of water in the
// presence of heat evaporates producing more Oxygen. :) Find the balance
// you want.
//
// ENJOY! :) Come visit me in LE :) 780, 6956 I have a large bar with tasting
// tables and hookahs.
// Anka
//
Constants
//User Definable variables
Hearths = 4
HeatX = 165
WoodX = 107
WaterX = 76
DangerX = 164
RGBBlue = 220
RGBGreen = 240
Guild = 1
// Y Coordinates - Don't change unless you are having a problem.
RegY = 74 // Y coord for Regulator button
BeginY = 245 // Y coord for Begin Button
HeatY = 156 // Y coord for Heat Bar
WoodY = 180 // Y coord for Wood Bar
WaterY = 192 // Y coord for Water Bar
DangerY = 204 // Y coord for Danger Bar
StatusY = 216 // Y coord for Status Bar
WoodBY = 250 // Y coord for Wood and Water buttons
//End User variables
Hrow = 0
Hrow1 = 0
AddX = 226
Add2X = 15
Add1Y = 65
Add2Y = 17
Add3Y = 250
RegX = 47
BeginX = 111
NewX = 0
New2X = 0
New2Y = 0
NewY = 0
Heat = 0
Wood = 0
Water = 0
Danger = 0
Status = 0
OxyY = 168
StatusX = 167
WoodBX = 35
WaterBX = 85
Num = 0
Jump = 5
JumpM = 0
Jumped = 0
Used = 0
MDelay = 250
SDelay = 200
S1Delay = 100
Count = 0
CountM = 0
MouseX = 0
MouseY = 0
CheckDelay = 0
Setup = 0
SetX = 10
SetY = 40
SetAddX = 227
SetAddY = 250
SetLoop = 0
Mouse = 1
OrigX = 0
OrigY = 0
End
Form ccHearth, Settings
ed1=Combobox:Hearths:1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
ed13=Editbox:Hearths Across:4
ed2=CheckBox:Guilded?:True
ed14=Checkbox:Need Setup?:True
ed15=Checkbox:Stealth Mouse:False
ed3=Editbox:Heat (75-188):165
//ed10=Editbox:HeatMin (75-188):116
//ed11=Editbox:HeatMax (75-188):184
//ed4=Editbox:Low Oxy (75-188):82
//ed5=Editbox:High Oxy (75-188):134
ed6=Editbox:Wood (75-188):107
ed7=Editbox:Water (75-188):76
ed8=Editbox:RGBGreen:240
ed9=Editbox:RGBBlue:220
ed12=Editbox:Check Bars Interval (miliseconds):4000
ed16=Checkbox:Mouse Check:False
end
FormLoad ccHearth, ccHearth.frm
if ShowForm ccHearth
SetConst Hearths = ccHearth[ed1]
If ccHearth[ed2] = True
SetConst Guild = 1
Else
SetConst Guild = 0
End
SetConst HeatX = ccHearth[ed3]
//SetConst Oxy1X = ccHearth[ed4]
//SetConst Oxy2X = ccHearth[ed5]
SetConst WoodX = ccHearth[ed6]
SetConst WaterX = ccHearth[ed7]
SetConst RGBGreen = ccHearth[ed8]
SetConst RGBBlue = ccHearth[ed9]
//SetConst HeatMin = ccHearth[ed10]
//SetConst HeatMax = ccHearth[ed11]
SetConst CheckDelay = ccHearth[ed12]
Set HRow = ccHearth[ed13]
Compute SetLoop = $Hearths - 1
Compute HRow1 = $Hrow + 1
If ccHearth[ed15] = True
Set Mouse = 0
End
else
Stop
end
FormSave ccHearth, ccHearth.frm
MousePos 100, 20 //Activates eGenesis window.. Don't run ACTool maximized.
Delay $MDelay
LeftClick
Delay 2000
If $Guild = 1
Call Guild
End
if ccHearth[ed16] = True
Call HearthTest
End
If ccHearth[ed14] = True
Call Setup
End
Call SetReg
SetConst NewX = $BeginX
SetConst NewY = $BeginY
SetConst Count = 1
Loop $Hearths
If $Count = $HRow1 //$Jump
SetConst NewX = $BeginX
Compute NewY = $BeginY + $Add3Y
End
MousePos $NewX, $NewY
Delay $MDelay
Rightclick
Delay $MDelay
Compute NewX = $NewX + $AddX
Compute Count = $Count + 1
End
SetConst NewX = $BeginX //Dont remember why this is here :)
Call Main
Procedure Setup
Set NewX = $SetX
Set NewY = $SetY
Loop $SetLoop
Mousepos $SetX, $SetY
if {loopno} = $HRow
Set NewX = $SetX
Compute NewY = $SetY + $SetAddY
else
Compute NewX = $NewX + $SetAddX
End
Dragto $NewX, $NewY
End
End
Procedure Main
SetConst CountM = 1
SetConst Status = 0
Compute JumpM = $HRow1 - 1 //$Jump - 1
Loop $Hearths
If $CountM = $HRow1 //$Jump
// may have to use New Newx and newy variables in Main
SetConst NewX = $StatusX
Compute NewY = $StatusY + $Add3Y
SetConst New2X = $WaterBX
Compute New2Y = $WoodBY + $Add3Y
End
While $Status = 0
Call CheckBars
If $Status = 1
Call Snuff
//code to advance to next hearth
Compute Used = $Used + 1
If $Used = $JumpM
Compute HeatX = $HeatX - (($Used - 1) * $AddX)
Compute HeatY = $HeatY + $Add3Y
Compute WoodX = $WoodX - (($Used - 1) * $AddX)
Compute WoodY = $WoodY + $Add3Y
Compute WaterX = $WaterX - (($Used - 1) * $AddX)
Compute WaterY = $WaterY + $Add3Y
Compute DangerX = $DangerX - (($Used - 1) * $AddX)
Compute DangerY = $DangerY + $Add3Y
Compute StatusX = $StatusX - (($Used - 1) * $AddX)
Compute StatusY = $StatusY + $Add3Y
//Compute WaterBX = $WaterBX - (($Used -1) * $AddX)
//Compute WoodBX = $WoodBX - (($Used - 1 ) * $AddX)
//Compute WoodBY = $WoodBY + $Add3Y
SetConst Jumped = 1
Continue
Else
Compute HeatX = $HeatX + $AddX
Compute WoodX = $WoodX + $AddX
Compute WaterX = $WaterX + $AddX
Compute DangerX = $DangerX + $AddX
Compute StatusX = $StatusX + $AddX
//Compute WaterBX = $WaterBX + $AddX
//Compute WoodBX = $WoodBX + $AddX
End
Continue
End
If $Heat = 0 and $Danger = 0 and $Wood = 0
Call Wood
Else
If $Heat = 1 or $Danger = 1
If $Water = 0
Call Water
End
End
End
Delay $CheckDelay
End
Compute CountM = $CountM + 1
SetConst Status = 0
End
End
Procedure CheckBars
If $Mouse = 1
MousePos $HeatX, $HeatY
Delay $SDelay
end
LoadRGB $HeatX, $HeatY
if {RGBBlue} > $RGBBlue
SetConst Heat = 1
Else
SetConst Heat = 0
End
If $Mouse = 1
MousePos $WoodX, $WoodY
Delay $S1Delay
end
LoadRGB $WoodX, $WoodY
if {RGBBlue} > $RGBBlue
SetConst Wood = 1
Else
SetConst Wood = 0
End
If $Mouse = 1
MousePos $WaterX, $WaterY
Delay $S1Delay
End
LoadRGB $WaterX, $WaterY
if {RGBBlue} > $RGBBlue
SetConst Water = 1
Else
SetConst Water = 0
End
If $Mouse = 1
MousePos $DangerX, $DangerY
Delay $S1Delay
End
LoadRGB $DangerX, $DangerY
if {RGBBlue} > $RGBBlue
SetConst Danger = 1
Else
SetConst Danger = 0
End
If $Mouse = 1
MousePos $StatusX, $StatusY
End
LoadRGB $StatusX, $StatusY
if {RGBGreen} > $RGBGreen
SetConst Status = 1
Else
SetConst Status = 0
End
End
Procedure Water
SetConst NewX = $WaterBX
SetConst NewY = $WoodBY
Loop $Hearths
IF {loopno} = $HRow1 //$Jump
SetConst NewX = $WaterBX
Compute NewY = $WoodBY + $Add3Y
End
If {loopno} > $Used
If $Mouse = 0
Set OrigX = {mousex}
Set OrigY = {mousey}
End
MousePos $NewX, $NewY
Delay $SDelay
Rightclick
Delay $SDelay
If $Mouse = 0
Mousepos $OrigX, $OrigY
End
End
Compute NewX = $NewX + $AddX
End
SetConst NewX = $WaterBX
End
Procedure Snuff
SetConst New2X = $WaterBX
SetConst New2Y = $WoodBY
Compute Num = $Used + 1
Loop $Hearths
IF {loopno} = $Hrow1 //$Jump
SetConst New2X = $WaterBX
Compute New2Y = $WoodBY + $Add3Y
End
If {loopno} = $Num
If $Mouse = 0
Set OrigX = {mousex}
Set OrigY = {mousey}
End
MousePos $New2X, $New2Y
Loop 8
Rightclick
End
If $Mouse = 0
Mousepos $OrigX, $OrigY
End
End
Compute New2X = $New2X + $AddX
End
End
Procedure Wood
SetConst NewX = $WoodBX
SetConst NewY = $WoodBY
Loop $Hearths
IF {loopno} = $HRow1 //$Jump
SetConst NewX = $WoodBX
Compute NewY = $WoodBY + $Add3Y
End
If {loopno} > $Used
If $Mouse = 0
Set OrigX = {mousex}
Set OrigY = {mousey}
End
MousePos $NewX, $NewY
Delay $SDelay
Rightclick
Delay $SDelay
If $Mouse = 0
MousePos $OrigX, $OrigY
End
End
Compute NewX = $NewX + $AddX
End
SetConst NewX = $WoodBX
End
Procedure SetReg
SetConst NewX = $RegX
SetConst Count = 1
Loop $Hearths
If $Count = $HRow1
SetConst NewX = $RegX
Compute RegY = $RegY + $Add3Y
End
MousePos $NewX, $RegY
Delay $MDelay
Rightclick
Compute NewX = $NewX + $Add2X
If $Count > $HRow
Compute NewY = $RegY + $Add2Y
else
Compute NewY = $RegY + $Add1Y
end
MousePos $NewX, $NewY
Delay $MDelay
Rightclick
Delay $MDelay
Compute NewX = $NewX + $AddX
Compute Count = $Count + 1
End
SetConst NewX = $RegX
SetConst Count = 1
End
Procedure Guild
Compute BeginX = $BeginX - 7
Compute BeginY = $BeginY + 16
Compute RegY = $RegY + 16
Compute RegX = $RegX - 14
Compute AddX = $AddX - 15
Compute Add3Y = $Add3Y + 16
Compute Add1Y = $Add1Y - 16
Compute WoodBY = $WoodBY + 16
Compute HeatX = $HeatX - 4
Compute HeatY = $HeatY + 16
Compute WoodX = $WoodX - 1
Compute WoodY = $WoodY + 16
Compute WaterY = $WaterY + 16
Compute DangerX = $DangerX - 4
Compute DangerY = $DangerY + 16
Compute StatusX = $StatusX - 5
Compute StatusY = $StatusY + 16
Set SetAddX = 212
Set SetAddY = 266
End
Procedure HearthTest
Loop 1
MousePos $HeatX, $HeatY
Delay 2000
MousePos $WoodX, $WoodY
Delay 2000
MousePos $WaterX, $WaterY
Delay 2000
MousePos $DangerX, $DangerY
Delay 2000
MousePos $StatusX, $StatusY
Delay 2000
MousePos $WoodBX, $WoodBY
Delay 2000
MousePos $WaterBX, $WoodBY
Delay 2000
MousePos $BeginX, $BeginY
Delay 2000
end
Stop
End
//Written with ACTool 5.3.0 by Anka
Bell Asterisk
