User:Oni/Hearth

• Slightly edited - sped up to make more reliable.
• 1024x768 goodness :)

//Charcoal Hearth
//
// Setup:  This handles from 1 to 8 charcoal hearths at a time.  Pin the windows
//         in 2 rows of 4 starting in top left corner.  But them up together but
//         Don't overlap them at all.  I suggest at least 200
//         wood per hearth and a normally hold about 150 water jugs.
//         All hearths are slightly different but I suggest that you put your
//         fastest burning hearths first in line.  The current settings are set
//         for guilded hearths but its a bit more efficient atm with personal
//         hearths.  You can tweak the settings below to alter Heat, Wood, Water
//         and danger thresholds.  The macro doesn't watch Oxygen.  If your oxygen
//         is getting too high, lower this by increasing WoodX in constants since
//         adding wood lowers oxygen.
//
//  If you see anything odd, /chat me.
//
//  Known Issues:  You will see it add some wood during the snuff process.  It's
//                 not much wood but I'm looking into it.
//
//  ENJOY! :)  Come acro me in LE :) 780, 6956
//  Anka
//
Constants
  //User Definable variables
  Hearths = 3       //Number of Hearths you are running. 1-8
  HeatX = 168       //Threshold for Heat bar, increase or decrease as needed.
  WoodX = 107      //Wood threshold, adds wood/round up to this point.
  WaterX = 76      //Alowable water level, not much play here.. dont lower more than 2
  DangerX = 164   //Threshold for Danger bar, increase or decrease as needed.
  RGBBlue = 220    //Threshold for detecting the color blue.  Some video cards
  //                   are having problems with this.  I will add a color test soon to
  //                   help.  If you are having problems. Run just 1 hearth and try
  //                   lowering this number by 10 at a time.  It's hard for me to see
  //                   what is going on without using your pc :(
  Guild = 1       // 1 for Guilded or public hearths, 0 for Personal hearths
  //End User variables
  AddX = 226
  Add2X = 15
  Add1Y = 65
  Add2Y = 17
  Add3Y = 250
  RegX = 47
  RegY = 74
  BeginX = 111
  BeginY = 245
  NewX = 0
  New2X = 0
  New2Y = 0
  NewY = 0
  Heat = 0
  Wood = 0
  Water = 0
  Danger = 0
  Status = 0
  HeatY = 156
  OxyY = 168
  WoodY = 180
  
  WaterY = 192
  
  DangerY = 204
  StatusX = 167
  StatusY = 216
  WoodBX = 35
  WoodBY = 250
  WaterBX = 85
  Num = 0
  Jump = 5
  JumpM = 0
  Jumped = 0
  Used = 0
  
  MDelay = 50
  SDelay = 50
  S1Delay = 50
  Count = 0
  CountM = 0
  MouseX = 0
  MouseY = 0
  
End

MousePos 100, 20  //Activates eGenesis window.. Don't run ACTool maximized.
Delay $MDelay
LeftClick
Delay 2000

If $Guild = 1
  Call Guild
End

Call SetReg
SetConst NewX = $BeginX
SetConst NewY = $BeginY
SetConst Count = 1
Loop $Hearths
  If $Count = $Jump
    SetConst NewX = $BeginX
    Compute NewY = $BeginY + $Add3Y
  End
  MousePos $NewX, $NewY
  Delay $MDelay
  Rightclick
  Delay $MDelay
  Compute NewX = $NewX + $AddX
  Compute Count = $Count + 1
End
SetConst NewX = $BeginX  //Dont remember why this is here :)
Call Main

Procedure Main
  SetConst CountM = 1
  SetConst Status = 0
  Compute JumpM = $Jump - 1
  Loop $Hearths
    If $CountM = $Jump
      // may have to use New Newx and newy variables in Main
      SetConst NewX = $StatusX
      Compute NewY = $StatusY + $Add3Y
      SetConst New2X = $WaterBX
      Compute New2Y = $WoodBY + $Add3Y
    End
    
    While $Status = 0
      Call CheckBars
      If $Status = 1
        Call Snuff
        //code to advance to next hearth
        Compute Used = $Used + 1
        If $Used = $JumpM
          Compute HeatX = $HeatX - (($Used - 1) * $AddX)
          Compute HeatY = $HeatY + $Add3Y
          Compute WoodX = $WoodX - (($Used - 1) * $AddX)
          Compute WoodY = $WoodY + $Add3Y
          Compute WaterX = $WaterX - (($Used - 1) * $AddX)
          Compute WaterY = $WaterY + $Add3Y
          Compute DangerX = $DangerX - (($Used - 1) * $AddX)
          Compute DangerY = $DangerY + $Add3Y
          Compute StatusX = $StatusX - (($Used - 1) * $AddX)
          Compute StatusY = $StatusY + $Add3Y
          //Compute WaterBX = $WaterBX - (($Used -1) * $AddX)
          //Compute WoodBX = $WoodBX - (($Used - 1 ) * $AddX)
          //Compute WoodBY = $WoodBY + $Add3Y
          SetConst Jumped = 1
          Continue
        Else
          Compute HeatX = $HeatX + $AddX
          Compute WoodX = $WoodX + $AddX
          Compute WaterX = $WaterX + $AddX
          Compute DangerX = $DangerX + $AddX
          Compute StatusX = $StatusX + $AddX
          //Compute WaterBX = $WaterBX + $AddX
          //Compute WoodBX = $WoodBX + $AddX
        End
        Continue
      End
      If $Heat = 0 and $Danger = 0 and $Wood = 0
        Call Wood
      Else
        If $Heat = 1 or $Danger = 1
          If $Water = 0
            Call Water
          End
        End
      End
      
      Delay 1000
    End
    Compute CountM = $CountM + 1
    SetConst Status = 0
  End
End

Procedure CheckBars
  MousePos $HeatX, $HeatY
  Delay $SDelay
  LoadRGB {MouseX}, {MouseY}
  if {RGBBlue} > $RGBBlue
    SetConst Heat = 1
  Else
    SetConst Heat = 0
  End
  MousePos $WoodX, $WoodY
  Delay $S1Delay
  LoadRGB {mousex}, {mousey}
  if {RGBBlue} > $RGBBlue
    SetConst Wood = 1
  Else
    SetConst Wood = 0
  End
  MousePos $WaterX, $WaterY
  Delay $S1Delay
  LoadRGB {mousex}, {mousey}
  if {RGBBlue} > $RGBBlue
    SetConst Water = 1
  Else
    SetConst Water = 0
  End
  MousePos $DangerX, $DangerY
  Delay $S1Delay
  LoadRGB {MouseX}, {MouseY}
  if {RGBBlue} > $RGBBlue
    SetConst Danger = 1
  Else
    SetConst Danger = 0
  End
  MousePos $StatusX, $StatusY
  LoadRGB {MouseX}, {MouseY}
  if {RGBRed} = 6 and {RGBGreen} = 254 and {RGBBlue} = 5
    SetConst Status = 1
  Else
    SetConst Status = 0
  End
End

Procedure Water
  SetConst NewX = $WaterBX
  SetConst NewY = $WoodBY
  Loop $Hearths
    IF {loopno} = $Jump
      SetConst NewX = $WaterBX
      Compute NewY = $WoodBY + $Add3Y
    End
    If {loopno} > $Used
      MousePos $NewX, $NewY
      Delay $SDelay
      Rightclick
      Delay $SDelay
    End
    Compute NewX = $NewX + $AddX
  End
  SetConst NewX = $WaterBX
End

Procedure Snuff
  SetConst New2X = $WaterBX
  SetConst New2Y = $WoodBY
  Compute Num = $Used + 1
  Loop $Hearths
    IF {loopno} = $Jump
      SetConst New2X = $WaterBX
      Compute New2Y = $WoodBY + $Add3Y
    End
    If {loopno} = $Num
      MousePos $New2X, $New2Y
      Loop 8
        Rightclick
      End
    End
    Compute New2X = $New2X + $AddX
  End
End

Procedure Wood
  SetConst NewX = $WoodBX
  SetConst NewY = $WoodBY
  Loop $Hearths
    IF {loopno} = $Jump
      SetConst NewX = $WoodBX
      Compute NewY = $WoodBY + $Add3Y
    End
    If {loopno} > $Used
      MousePos $NewX, $NewY
      Delay $SDelay
      Rightclick
      Delay $SDelay
    End
    Compute NewX = $NewX + $AddX
  End
  SetConst NewX = $WoodBX
End

Procedure SetReg
  SetConst NewX = $RegX
  SetConst Count = 1
  Loop $Hearths
    If $Count = 5
      SetConst NewX = $RegX
      Compute RegY = $RegY + $Add3Y
    End
    MousePos $NewX, $RegY
    Delay $MDelay
    Rightclick
    Compute NewX = $NewX + $Add2X
    If $Count > 4
      Compute NewY = $RegY + $Add2Y
    else
      Compute NewY = $RegY + $Add1Y
    end
    MousePos $NewX, $NewY
    Delay $MDelay
    Rightclick
    Delay $MDelay
    Compute NewX = $NewX + $AddX
    Compute Count = $Count + 1
  End
  SetConst NewX = $RegX
  SetConst Count = 1
End

Procedure Guild
  Compute BeginX = $BeginX - 7
  Compute BeginY = $BeginY + 16
  Compute RegY = $RegY + 16
  Compute RegX = $RegX - 14
  Compute AddX = $AddX - 15
  Compute Add3Y = $Add3Y + 16
  Compute Add1Y = $Add1Y - 16
  Compute WoodBY = $WoodBY + 16
  Compute HeatX = $HeatX - 4
  Compute HeatY = $HeatY + 16
  Compute WoodX = $WoodX - 1
  Compute WoodY = $WoodY + 16
  Compute WaterY = $WaterY + 16
  Compute DangerX = $DangerX - 4
  Compute DangerY = $DangerY + 16
  Compute StatusX = $StatusX - 5
  Compute StatusY = $StatusY + 16
End
//Written with ACTool 5.3.0 by Anka
Bell Asterisk