Test of Dancing Waters

English	Deutsch	français	magyar	Türkçe

	Test of (the)
	Test of Dancing Waters
Discipline
Art and Music
Requirements
Level 16 Principles of Art and Music Project Management
Principles
Build a Dancing Waters Mechanism Start the Mechanism, achieving at least 20% Mechanical Stress Tear down your Fountain, OR do the following: Have Seven Judges rate your Fountain Design rated Good by most judges
Demonstration
Demonstrated by Avanya in River Plains on 2012-07-24by fulfilling the requested requirements.

Overview

Design an elegant water fountain using a variety of basins, nozzles and creative timing of effects.

First, build a Dancing Waters Mechanism, using a Small Construction Site. Then you can build basins nearby the Mechanism and install nozzles (which can be forged out of different metals) in the basins. Then the fun begins...

Dancing Waters Mechanism

Built in a Small Construction Site.

• 200 Cut Stones to lower water table
• 100 Concrete for basic mechanism
• 40 Glass Pipes for delicate control
• 2 Copper Pipes for main inflow and outflow
• 1 random 3-output gearbox

Note: The Mechanism can not be too close to another one, as it will not let you access it.

Installation Notes

There are a number of guides on the wiki (T6 and older) that explain the basics of how to make and work a fountain.

One item missing in these discriptions is "How to solve leaks". Leaks are marked by large bright blue circles on the interface.

Leaks come in several forms.

• Hosepipe Leak:

The most common is from a nozzle that points out of it's basin to another location but doesnt truely hit the other basin. The dots marking your location (yellow) and a tiny gray dot marks where the water is really going. There is about 5 or 10 ft difference. Just re-aim the nozzle by moving the yellow dot and it's gray shadow until the gray shadow is inside the target basin.

• Well is Dry Leak:

A draining basin may or may not be caused by a leak as it can also be caused by the more water flowing out than flowing in to the basin. If you watch the numbers on the interface that represent the water level as you test, if you see the numbers in any basin always going down, that means you are pushing out more water from your nozzles than the basin is receiving from another source. Either change the nozzle to something that pumps less water or have another fountain nozzle target that basin. You can also change the aim of a nozzle to "circle" the basin, where the gray dot is just inside the basin icon, but the actually animated spray will splash outside of the basin. Per other guides: either 50% of the water is re-captured or 100% is re-captured.

• Wind Carry Leak:

Another leak can show up if the basins are too far apart. While you can place them far way and the nozzle will target the basin correctly, you will see mysterious leak circles on the interface. You can move the basins closer together to clear up those leaks. You can also insert another basin in between them to "catch the water" passing over it.

• Mechanisim Stalled:

While not a leak, when this happens the fountain won't start at all. If the mechanism exceeds 99% (100%) it won't start. The easy fix for this is to reduce the flow of water from the nozzles. That means: Change to a different type of nozzle that uses less water. Another option is to add an interval with no action in the sequence for any nozzle. This spacer reduces the stress on the mechanism. Changing the nozzle has more direct reduction, adding a spacer has less but can be the difference between starting and not starting.

Basins

Each basin is built in a separate Small Construction Site.

Size	Copper Pipe	Cut Stone	Mandibular Glue	Diameter	Image
Small	10	30	15	8 ft. (0.5 coords)
Medium	20	60	30	12 ft. (0.75 coords)
Large	30	90	45	16 ft. (1 coord)
Huge	40	120	60	20 ft. (1.25 coords)

Nozzles

Nozzles are made in a Casting Box.

Name	Metal	Beeswax	Minutes	Ave. Flow Rate	Image
Crystal Fog	1 Brass	1	10	1.75
Dirty Rain	1 Copper	1	10	9.24
Foggy Shower	1 Copper	1	10	3.52
Light Rain	1 Bronze	1	20	3.50
Misty Bubbles	1 Brass	1	10	1.07
White Shower	4 Brass	4	30	2.45

Locations

Region	Coordinates	Designer	Passed
7L	1342, -1088	Sebilis	yes
7L	1368, -1013	Anastasya	yes
7L	671, -924	Ranno	no
RP	1581, 2789	Tallow	Yes
7L	1408, -1007	Hounddog	no
7L	1387, -980	Nissim	Yes
Sinai	2599, 5634	Myn	Yes
MV	942, 4856	Shiranai	No
MV	907, 4970	Rey	Yes
CCR	-573, 6869	Feyth	No
7L	817, -1144	JaylenaeYbarre	YES
RP	1460, 3475	Windrider	YES
RP	1457, 3514	Kalmkitty	YES
VoK	-2479, 5495	TreekaSu	No
RP	1614 2769	Pira	NO
RP	1325, 3364	Solaris	No
RP	1289, 1880	Nitocris	No
RP	1605, 2950	natta	Yes