Guides/River Plains Gem School

	Notice on Animations This page is heavy on both network and computing resources. If this is your first time visiting it, please give your browser some time to process it. It will be much faster once all images are cached.

• Located at 1558,2900 in RP
• The majority of this guide is taken from T6 and earlier, with thanks to the original authors. Updates for T7 will progressively be made!

Overview

Sections of Cuttable Gems are sliced away on a Gem Cutting Table until the result matches a target design in the Gem Catalogue. At that point, the cut gem may be removed into your inventory.

Nonstandard shapes may be saved in a Specimen Case (available with some multi-month pre-paid packages). Each case holds one cut gem. The contents of the specimen case may later be loaded onto a table for additional cutting.

In the absence of a specimen case, cut gems that don't match a Gem Catalogue entry must be discarded.

Positioning the Camera

Some players prefer to stand inside the table while cutting. However a good stance to begin with is to the right of Sanding Disk 1, in F6 view. Some players prefer to stand by the pole, with the camera rotated so it is on the rear right of the table. Others prefer the pole on the rear left, so the camera is looking at the face of the gem that will be sliced off by Disc 1. For some cuts you may want to change the camera angle to check on what is going on!

Using the Axis Controls

Getting used to the interface will make your gem cutting life easier. It does come with practice. Start by loading a cuttable gem. The option will come up when you click on the gem cutting table with a cuttable gem in your inventory. Pin the menu for reference.

Practice Session 1: 
* ROTATE the gem on the Z coordinate first. The + and - signs will switch the rotation one way or another. Four rotations brings you back to the beginning. 
* Now try the Y coordinate. The gem will FLIP towards you (-) or away from you (+) if you are facing Cutting Disk 1 at the front of the table. 
* Finally, try using the X axis. The gem will TWIRL either clockwise (+ -check) or anticlockwise (-) around the middle of the front face. 

It's easiest to view the table while using the Explorer's Camera (F6) or Builder's Camera (F7). Adjust your distance and viewing angle until it feels comfortable for you.

Eventually you may want cut gems using the hotkeys, but it makes sense to become familiar with the way the gem and cutting blades work first.

Cutting the Gem

There are three sanding disks. Each disc works in a different plane, and will remove 1 layer of solid gem each time you use it.

Disc 1 works in the vertical axis (90 degrees). Only using Disk 1 will make cubes and rectangular box shapes.

Disc 2 works on the edge to edge diagonal (45 degrees to Disk 1). Using only Disk 2 will make diamond shapes, sometimes with interesting edge patterns.

Disc 3 works on the corner to corner diagonal. (45 degrees to Disk 2) Using Disk 3 also creates diamond shapes, but in a different orientation.

All you need to cut a gem is one or a combination of these disks to create a predetermined shape, as listed in the gem catalogue. The gem catalog will display a sample gem atop the pole on the table, as a reference.

Making the most of Flaws

All cuttable gems have flaws, in an endless array of random configurations. Most types of cut gem can only be formed by taking advantage of flaws in the gem. For example, the "eyelet" cut requires a flaw two layers deep, surrounded by unflawed gem. The "full eye" cut is harder, requiring a three-deep flaw. Before starting to cut any gem, examine it carefully to see what can be made from it. It is MUCH more economical to look first to see what is in the gem and take advantage of what you have than waste precious cuttable gems by going for only what you need. The rarest sets of flaws might just come up, giving you a chance at a Dragyn's Eye or Full Aidenn Mask, and those chances are not to be missed!

Sculptors sometimes say that they see the statue hidden within a block of stone, and cut away all that is not a part of it. This is exactly how gems are made: The desired cut gem is hidden within the rough stone. Sand away all the bits that are not what you want.

When you have produced an exact match for a cut gem, rotate the gem so it matches the catalogue example and complete the cut by selecting the type of gem you are making from the "finished cutting" menu of the cutting table. If your gem is an exact match for the sample in the catalogue, it will be removed from the table.

Some gem cuts require flaws that are present in only a small fraction of rough gems. Zomboe, an expert gem cutter, has provided this list of rare cuts: Tiki Mask is insanely rare. Others, in approximate order of decreasing rarity, are King's Tomb, Unity, Bridge, Lotus, Ring, Dragyn's Eye, Full Aidenn Mask, Ra's Lantern. If you find a rough gem with the right flaws that can be cut into one of these, it's usually best to do it even if you're currently looking for something else - you'll be glad of it later.

Cut Gem Catalogue

Feel free to replace pictures with better ones (preferably 120x120).

Cut Gem		Carats	Instructions	Rarity	Uses
Aidenn Mask		15	Two flaws next to each other with solid gem on the outside edge. To cut, use Disk 1 to cut away excess from the front and back of the flaws, then use Disk 2 to cut the angled edges.	Rare
Amanti		11	None	All	1 Cut Garnet: Amanti for Test of the Windsong 1 Cut Turquoise: Amanti for Test of the Windsong <Varying Amounts> Garnet: Amanti for Test of the Covered Cartouche
Amunet		46	a sphere of unflawed gem radius 5?
Appolonia		21	One flaw with a large area of unflawed gem on one side of it	All	1 Cut (Any Gem): Appolonia for Test of the Windsong
Bastet		11	A two-deep vertex flaw	All
Bridge		14	A pair of two-deep vertex flaws directly opposite each other	Ultra-rare
Cat's Eye		28	A two-deep vertex flaw surrounded by a double ring of unflawed gem	Rare
Choronzon		43	A 5x5x3 block of unflawed gem	Common
Corner Heart		4	Very small unflawed area	All
Crater		9	A pair of Three-deep flaws intersecting.	very rare
Dalessi		25	None	All
Dragyn's Eye		17	2 aligned flaws on adjacent faces	Rare
Eyelet		16	A two-deep vertex flaw	Common
Full Aidenn Mask		21	Parallel two-deep vertex flaws with a one-deep flaw between and below them	Ultra rare
Full Eye		24	A three-deep vertex flaw	Rare
Hexas Plate		9	One-deep vertex flaw	All
Hile's Chevrons		25	Unflawed plane	All
Khufu's Ship		22	Double-width one-deep vertex flaw	Uncommon
King's Tomb		43	Single flaw surrounded by double ring of unflawed gem	Ultra rare
Lens		12	None	All
Looking Glass		24	A 6x4x1 area of unflawed gem	Common
Lotus		19	Specific pattern	Ultra rare
Moorish Arch		15
Osiris Eye		10	Description: A long 3 width flaw with a 2-deep flaw in the middle. To cut, use Disk 1 to remove the excess gem from both long sides. Flip so the 'eye' is at the bottom and pointing towards the front of the table. Use Disk 2 to create a peak and reveal the central eye. Turn back around and position to use Disk 3 to cut the points at the top and bottom.
Prism
Queen's Tomb		18	Single flaw surrounded by a ring of unflawed gem	Common
Ra's Lantern		27	Double-width vertex flaw, with one flaw two-deep, with unflawed gem on remaining three sides of prism	Ultra rare
Reflection		14	Two two-deep vertex flaws next to each other, points touching	Rare
Refractor
Ring		13	Two deep intersecting flaws forming a T shape surrounded by unflawed gem	Ultra rare
Shen of Horus		28	two adjacent 3-deep flaws, surrounded by unflawed gem	crazy
Solarkin		24
Sprocket		14	Relatively unflawed diagonal plane	All
Suspension		9	2-deep vertex flaw
Symmetry		19	A 3x3x3 area of unflawed gem	All
The Fox		?
The Shark		8	A three-deep vertex flaw	Rare
Thistle		12	None	All
Thoth's Knot		18	Two lines of three flaws, crossing adjacent to one another, with solid gem beside each and 1 cell of gem above and below	Ultra rare
Tiki Mask		35	Double-width one-deep vertex flaw	Ultra rare
Tombstone		26
Triclops		14
Unity		36	Two-deep vertex flaw surrounded by an area of unflawed gem. The trick is to find the configuration of flaw and unflawed gem. To cut, look for a Full Eye surrounded by solid gem, and use Cutting Disk 2 to create the distinctive frame around the central flaw.	Ultra rare