Macro/Automato/barrel vise

Macro Name: barrel _vise
Author: Not known

Setting Up

Open and pin the Barrel Vise. Make sure you have 100 boards, 2 Copper Strap and Wood for fuel (around 80) in your inventory for each barrel you wish to make.

What it does

• Makes Small Barrel by following these simple rules:

• If "Fuel" is length 2, do nothing and wait for the next tick
• If "Fuel" is length 1, check flame: If not high, add 1 wood, otherwise do nothing
• If "Fuel" is empty, add 2 wood

This is a reliable script, and makes a small barrel 100% of the time.

It is possible to enter the total number you wish to make in the starting window, and it will loop reliably to make that many barrels. If you change your mind, there is a Finish up button to finish making the barrel - again, this is reliable and works 100% of the time.

Tale 7 problems

Generates an error at the following point:

local pos = srFindImageInRange("Vise_bars.png", window_pos[0], window_pos[1], window_w, window_h);

Whilst window_pos correctly provides the top left coordinate of the Barrel Vise window, and window_w and window_h has the correct window width and height, it's not seeing the image Vise_bars.png in that area, and crashes out of the macro with an error. It is possible to replace it with the following and work correctly, although with only one Barrel Vise window:

local pos = srFindImage("Vise_bars.png");