The Wiki for Tale 4 is in read-only mode and is available for archival and reference purposes only. Please visit the current Tale 11 Wiki in the meantime.
If you have any issues with this Wiki, please post in #wiki-editing on Discord or contact Brad in-game.
User:Moses/oven
From A Tale in the Desert
Jump to navigationJump to searchOven Macro by Anka
//Charcoal Oven
//
// Setup: This handles from 1 to 8 charcoal ovens at a time. Pin the windows
// in 2 rows of 4 starting in top left corner. But them up together but
// Don't overlap them at all. I suggest at least 300
// wood per oven and a normally hold about 150 water jugs.
// All ovens are slightly different but I suggest that you put your
// fastest burning oven first in line. You can tweak the settings
// to your liking in the new GUI window. Your settings will be saved.
//
// If you see anything odd, /chat me.
//
// ENJOY! :)
// Anka
//
Constants
//User Definable variables
Ovens = 3 //Number of Ovens you are running. 1-8
HeatMinX = 129
HeatX = 157 //Threshold for Heat bar, increase or decrease as needed.
HeatMaxX = 178
Oxy1X = 82
Oxy2X = 133
WoodX = 109 //Wood threshold, adds wood/round up to this point.
WaterX = 76 //Alowable water level, not much play here.. dont lower more than 2
DangerX = 170 // 162 //Threshold for Danger bar, increase or decrease as needed.
RGBBlue = 220 //Threshold for detecting the color blue.
RGBGreen = 250 //Threshold for detecting the color green. Some video cards
// are having problems with this. If you are having problems, run
// just 1 oven and try lowering this number by 10 at a time. It's
// hard for me to see what is going on without using your pc :(
// This method is used for RGBBlue and RGBGreen.
CheckDelay = 3900
Guild = 1 // 1 for Guilded or public ovens, 0 for Personal ovens
//End User variables
AddX = 212 // 215-Personal 212-Guilded
Add2X = 15
Add1Y = 65
Add2Y = 17
Add3Y = 233
HeatMin = 0
HeatMax = 0
DangerMax = 0
BeginX = 103
BeginY = 229
NewX = 0
New2X = 0
New3X = 0
New2Y = 0
NewY = 0
Heat = 0
Oxy = 0
Wood = 0
Water = 0
Danger = 0
Status = 0
HeatY = 140
OxyY = 152
WoodY = 164
WaterY = 176
DangerY = 188
StatusX = 172
StatusY = 200
WoodBX = 35
WoodBY = 234
WaterBX = 85
Vent0 = 130
Vent1 = 155
Vent2 = 180
VentBX = 0
OldVent = 1
Num = 0
Jump = 5
JumpM = 0
Jumped = 0
Used = 0
WoodNum = 0
MDelay = 200
SDelay = 150
S1Delay = 100
Count = 0
CountM = 0
MouseX = 0
MouseY = 0
End
Form ccOven, Settings
ed1=Combobox:Ovens:1, 2, 3, 4, 5, 6, 7, 8
ed2=CheckBox:Guilded?:True
ed3=Editbox:Heat (75-188):162
ed10=Editbox:HeatMin (75-188):116
ed11=Editbox:HeatMax (75-188):184
ed4=Editbox:Low Oxy (75-188):82
ed5=Editbox:High Oxy (75-188):134
ed6=Editbox:Wood (75-188):109
ed7=Editbox:Water (75-188):77
ed8=Editbox:RGBGreen:240
ed9=Editbox:RGBBlue:220
ed12=Editbox:Check Bars Interval (miliseconds):4000
end
FormLoad ccOven, ccOven.frm
if ShowForm ccOven
SetConst Ovens = ccOven[ed1]
If ccOven[ed2] = True
SetConst Guild = 1
Else
SetConst Guild = 0
End
SetConst HeatX = ccOven[ed3]
SetConst Oxy1X = ccOven[ed4]
SetConst Oxy2X = ccOven[ed5]
SetConst WoodX = ccOven[ed6]
SetConst WaterX = ccOven[ed7]
SetConst RGBGreen = ccOven[ed8]
SetConst RGBBlue = ccOven[ed9]
SetConst HeatMin = ccOven[ed10]
SetConst HeatMax = ccOven[ed11]
SetConst CheckDelay = ccOven[ed12]
else
Stop
end
FormSave ccOven, ccOven.frm
MousePos 100, 20 //Activates eGenesis window.. Don't run ACTool maximized.
Delay $MDelay
LeftClick
Delay 2000
If $Guild = 1
Call Guild
End
SetConst NewX = $BeginX
SetConst NewY = $BeginY
SetConst Count = 1
Loop $Ovens
If $Count = $Jump
SetConst NewX = $BeginX
Compute NewY = $BeginY + $Add3Y
End
MousePos $NewX, $NewY
Delay $MDelay
Rightclick
Delay $MDelay
Compute NewX = $NewX + $AddX
Compute Count = $Count + 1
End
SetConst NewX = $BeginX //Dont remember why this is here :)
Call Main
Procedure Main
SetConst CountM = 1
SetConst Status = 0
Compute JumpM = $Jump - 1
Loop $Ovens
If $CountM = $Jump
SetConst NewX = $StatusX
Compute NewY = $StatusY + $Add3Y
SetConst New2X = $WaterBX
Compute New2Y = $WoodBY + $Add3Y
End
While $Status = 0
Call CheckBars
If $Status = 1
Call Snuff
//code to advance to next hearth
Compute Used = $Used + 1
If $Used = $JumpM
Compute HeatMinX = $HeatMinX - (($Used - 1) * $AddX)
Compute HeatX = $HeatX - (($Used - 1) * $AddX)
Compute HeatMaxX = $HeatMaxX - (($Used - 1) * $AddX)
Compute HeatY = $HeatY + $Add3Y
Compute Oxy1X = $Oxy1X - (($Used - 1) * $AddX)
Compute Oxy2X = $Oxy2X - (($Used - 1) * $AddX)
Compute OxyY = $OxyY + $Add3Y
Compute WoodX = $WoodX - (($Used - 1) * $AddX)
Compute WoodY = $WoodY + $Add3Y
Compute WaterX = $WaterX - (($Used - 1) * $AddX)
Compute WaterY = $WaterY + $Add3Y
//Compute DangerX = $DangerX - (($Used - 1) * $AddX)
Compute DangerY = $DangerY + $Add3Y
Compute StatusX = $StatusX - (($Used - 1) * $AddX)
Compute StatusY = $StatusY + $Add3Y
//Compute WaterBX = $WaterBX - (($Used -1) * $AddX)
//Compute WoodBX = $WoodBX - (($Used - 1 ) * $AddX)
//Compute WoodBY = $WoodBY + $Add3Y
SetConst Jumped = 1
Continue
Else
Compute HeatMinX = $HeatMinX + $AddX
Compute HeatX = $HeatX + $AddX
Compute HeatMaxX = $HeatMaxX + $AddX
Compute Oxy1X = $Oxy1X + $AddX
Compute Oxy2X = $Oxy2X + $AddX
Compute WoodX = $WoodX + $AddX
Compute WaterX = $WaterX + $AddX
//Compute DangerX = $DangerX + $AddX
Compute StatusX = $StatusX + $AddX
//Compute WaterBX = $WaterBX + $AddX
//Compute WoodBX = $WoodBX + $AddX
End
Continue
End
Case
When $HeatMin = 1
Call Wood
Set WoodNum = 1
Else
If $Heat = 0 and $Danger = 0
If $WoodNum = 0 and $Wood = 0
Call Wood
Set WoodNum = 1
else
Set WoodNum = 0
End
Else
If $Heat = 1 or $Danger = 1
If $Water = 0 or $HeatMax = 1 or $DangerMax = 1
Call Water
End
End
End
End
If {loopno} > 3
Case
When $Oxy = 0
// Open vent full
If $OldVent <> $Oxy
SetConst VentBX = $Vent2
Call Vent
SetConst OldVent = 0
Delay 100
End
When $Oxy = 1
// Oxy set normal
If $OldVent <> $Oxy
SetConst VentBX = $Vent1
Call Vent
SetConst OldVent = 1
Delay 100
End
When $Oxy = 2
// Close vent
If $OldVent <> $Oxy
SetConst VentBX = $Vent0
Call Vent
SetConst OldVent = 2
Delay 100
End
End
End
Delay $CheckDelay
End
Compute CountM = $CountM + 1
SetConst Status = 0
End
End
Procedure CheckBars
MousePos $HeatMinX, $HeatY
Delay $SDelay
LoadRGB {MouseX}, {MouseY}
if {RGBBlue} < $RGBBlue
SetConst HeatMin = 1
else
Set HeatMin = 0
End
MousePos $HeatX, $HeatY
Delay $SDelay
LoadRGB {MouseX}, {MouseY}
if {RGBBlue} > $RGBBlue
SetConst Heat = 1
Else
SetConst Heat = 0
End
MousePos $HeatMaxX, $HeatY
Delay $SDelay
LoadRGB {MouseX}, {MouseY}
if {RGBBlue} > $RGBBlue
SetConst HeatMax = 1
Else
SetConst HeatMax = 0
End
MousePos $Oxy1X, $OxyY
Delay $SDelay
LoadRGB {MouseX}, {MouseY}
if {RGBBlue} > $RGBBlue
SetConst Oxy = 1
Else
SetConst Oxy = 0
End
MousePos $Oxy2X, $OxyY
Delay $SDelay
LoadRGB {MouseX}, {MouseY}
if {RGBBlue} > $RGBBlue
SetConst Oxy = 2
End
MousePos $WoodX, $WoodY
Delay $S1Delay
LoadRGB {mousex}, {mousey}
if {RGBBlue} > $RGBBlue
SetConst Wood = 1
Else
SetConst Wood = 0
End
MousePos $WaterX, $WaterY
Delay $S1Delay
LoadRGB {mousex}, {mousey}
if {RGBBlue} > $RGBBlue
SetConst Water = 1
Else
SetConst Water = 0
End
MousePos $HeatX, $DangerY
Delay $S1Delay
LoadRGB {MouseX}, {MouseY}
if {RGBBlue} > $RGBBlue
SetConst Danger = 1
Else
SetConst Danger = 0
End
MousePos $HeatMaxX, $DangerY
Delay $S1Delay
LoadRGB {MouseX}, {MouseY}
if {RGBBlue} > $RGBBlue
SetConst DangerMax = 1
Else
SetConst DangerMax = 0
End
MousePos $StatusX, $StatusY
LoadRGB {MouseX}, {MouseY}
if {RGBGreen} > $RGBGreen
//if {RGBRed} = 6 and {RGBGreen} = 254 and {RGBBlue} = 5
SetConst Status = 1
Else
SetConst Status = 0
End
End
Procedure Water
SetConst NewX = $WaterBX
SetConst NewY = $WoodBY
Loop $Ovens
IF {loopno} = $Jump
SetConst NewX = $WaterBX
Compute NewY = $WoodBY + $Add3Y
End
If {loopno} > $Used
MousePos $NewX, $NewY
Delay $SDelay
Rightclick
Delay $SDelay
End
Compute NewX = $NewX + $AddX
End
SetConst NewX = $WaterBX
End
Procedure Vent
SetConst NewX = $VentBX
SetConst NewY = $WoodBY
Loop $Ovens
IF {loopno} = $Jump
SetConst NewX = $VentBX
Compute NewY = $WoodBY + $Add3Y
End
If {loopno} > $Used
MousePos $NewX, $NewY
Delay $SDelay
Rightclick
Delay $SDelay
End
Compute NewX = $NewX + $AddX
End
SetConst NewX = $VentBX
End
Procedure Snuff
SetConst New2X = $WaterBX
SetConst New3X = $Vent2
SetConst New2Y = $WoodBY
Compute Num = $Used + 1
Loop $Ovens
IF {loopno} = $Jump
SetConst New2X = $WaterBX
SetConst New3X = $Vent2
Compute New2Y = $WoodBY + $Add3Y
End
If {loopno} = $Num
MousePos $New2X, $New2Y
Loop 8
Rightclick
End
MousePos $New3X, $WoodBY
Delay 200
Rightclick
End
Compute New2X = $New2X + $AddX
Compute New3X = $New3X + $AddX
End
End
Procedure Wood
SetConst NewX = $WoodBX
SetConst NewY = $WoodBY
Loop $Ovens
IF {loopno} = $Jump
SetConst NewX = $WoodBX
Compute NewY = $WoodBY + $Add3Y
End
If {loopno} > $Used
MousePos $NewX, $NewY
Delay $SDelay
Rightclick
Delay $SDelay
End
Compute NewX = $NewX + $AddX
End
SetConst NewX = $WoodBX
End
Procedure Guild
//Compute BeginX = $BeginX - 7
Compute BeginY = $BeginY + 16
Compute AddX = $AddX - 3
Compute Add3Y = $Add3Y + 16
Compute Add1Y = $Add1Y - 16
Compute WoodBY = $WoodBY + 16
//Compute HeatX = $HeatX - 4
Compute HeatY = $HeatY + 16
//Compute Oxy1X = $Oxy1X
//Compute Oxy2X =
Compute OxyY = $OxyY + 16
//Compute WoodX = $WoodX - 1
Compute WoodY = $WoodY + 16
Compute WaterY = $WaterY + 16
//Compute DangerX = $DangerX - 4
Compute DangerY = $DangerY + 16
//Compute StatusX = $StatusX - 5
Compute StatusY = $StatusY + 16
End
//Written with ACTool 5.3.0 by Anka
Bell Asterisk
