The Wiki for Tale 5 is in read-only mode and is available for archival and reference purposes only. Please visit the current Tale 11 Wiki in the meantime.
If you have any issues with this Wiki, please post in #wiki-editing on Discord or contact Brad in-game.
User:Kasiya/flax
From ATITD5
Jump to navigationJump to searchflax.lua
-- Edit these first 2 to adjust how much is planted in a pass
-- May need to adjust walk_time in flax_common.inc if you move too slowly to keep up
-- grids tested: 2x2, 3x3, 5x5, 6x6 (probably need 3+ dex and 600ms walk time)
grid_w = 5;
grid_h = 5;
loadfile("luaScripts/flax_common.inc")();
loadfile("luaScripts/screen_reader_common.inc")();
loadfile("luaScripts/ui_utils.inc")();
-- Just testing spiral algorithm, ignore this...
function spiraltest()
-- for spiral
local dxi=1;
local dt_max=grid_w;
local dt=grid_w;
local dx={1, 0, -1, 0};
local dy={0, -1, 0, 1};
local num_at_this_length = 3;
-- Plant and pin
for y=1, grid_h do
for x=1, grid_w do
lsPrintln('doing ' .. x .. ',' .. y);
-- move to next position
if not ((x == grid_w) and (y == grid_h)) then
lsPrintln('walking dx=' .. dx[dxi] .. ' dy=' .. dy[dxi]);
dt = dt - 1;
if dt == 1 then
dxi = dxi + 1;
num_at_this_length = num_at_this_length - 1;
if num_at_this_length == 0 then
dt_max = dt_max - 1;
num_at_this_length = 2;
end
if dxi == 5 then
dxi = 1;
end
dt = dt_max;
end
else
lsPrintln('skipping walking, on last leg');
end
end
end
end
function doit()
-- num_loops = promptNumber("How many " .. grid_w .. "x" .. grid_h .. " passes ?", 5);
promptFlaxNumbers(1);
askForWindow("Make sure the plant flax window is pinned and you are in F8F8 cam zoomed in. You may need to F12 at low resolutions or hide your chat window (if it starts planting and fails to move downward, it probably clicked on your chat window). Will plant grid NE of current location. 'Plant all crops where you stand' must be ON. 'Right click pins/unpins a menu' must be ON.");
initGlobals();
local went_to_seeds = 0; -- Don't loop if we lost one, it'll mess us up!
srReadScreen();
local xyPlantFlax = srFindImage(imgFlax1);
if not xyPlantFlax then
xyPlantFlax = srFindImage(imgFlax2);
if not xyPlantFlax then
error 'Could not find plant window';
end
end
xyPlantFlax[0] = xyPlantFlax[0] + 5;
local xyCenter = getCenterPos();
local xyFlaxMenu = {};
xyFlaxMenu[0] = xyCenter[0] - 43;
xyFlaxMenu[1] = xyCenter[1] + 0;
for loop_count=1, num_loops do
-- for spiral
local dxi=1;
local dt_max=grid_w;
local dt=grid_w;
local dx={1, 0, -1, 0};
local dy={0, -1, 0, 1};
local num_at_this_length = 3;
local x_pos = 0;
local y_pos = 0;
-- Plant and pin
for y=1, grid_h do
for x=1, grid_w do
lsPrintln('doing ' .. x .. ',' .. y .. ' of ' .. grid_w .. ',' .. grid_h);
statusScreen("(" .. loop_count .. "/" .. num_loops .. ") Planting " .. x .. ", " .. y);
-- Plant
lsPrintln('planting ' .. xyPlantFlax[0] .. ',' .. xyPlantFlax[1]);
setWaitSpot(xyFlaxMenu[0], xyFlaxMenu[1]);
srClickMouseNoMove(xyPlantFlax[0], xyPlantFlax[1], 0);
srSetMousePos(xyFlaxMenu[0], xyFlaxMenu[1]);
waitForChange();
-- lsSleep(delay_time);
-- Bring up menu
lsPrintln('menu ' .. xyFlaxMenu[0] .. ',' .. xyFlaxMenu[1]);
setWaitSpot(xyFlaxMenu[0]+5, xyFlaxMenu[1]);
srClickMouse(xyFlaxMenu[0], xyFlaxMenu[1], 0);
waitForChange();
-- lsSleep(delay_time);
-- Check for window size
checkWindowSize(xyFlaxMenu[0], xyFlaxMenu[1]);
-- Pin
lsPrintln('pin ' .. (xyFlaxMenu[0]+5) .. ',' .. xyFlaxMenu[1]);
srClickMouseNoMove(xyFlaxMenu[0]+5, xyFlaxMenu[1]+0, 1);
-- lsSleep(delay_time);
-- Move window
local pp = pinnedPos(x, y);
lsPrintln('move ' .. (xyFlaxMenu[0]+5) .. ',' .. xyFlaxMenu[1] .. ' to ' .. pp[0] .. ',' .. pp[1]);
drag(xyFlaxMenu[0] + 5, xyFlaxMenu[1],
pp[0], pp[1], 0);
-- lsSleep(delay_time);
-- move to next position
if not ((x == grid_w) and (y == grid_h)) then
lsPrintln('walking dx=' .. dx[dxi] .. ' dy=' .. dy[dxi]);
x_pos = x_pos + dx[dxi];
y_pos = y_pos + dy[dxi];
srClickMouseNoMove(xyCenter[0] + walk_px_x*dx[dxi], xyCenter[1] + walk_px_y*dy[dxi], 0);
lsSleep(walk_time);
dt = dt - 1;
if dt == 1 then
dxi = dxi + 1;
num_at_this_length = num_at_this_length - 1;
if num_at_this_length == 0 then
dt_max = dt_max - 1;
num_at_this_length = 2;
end
if dxi == 5 then
dxi = 1;
end
dt = dt_max;
end
else
lsPrintln('skipping walking, on last leg');
end
end
checkBreak();
end
statusScreen("(" .. loop_count .. "/" .. num_loops .. ") Refocusing windows...");
-- Bring windows to front
for y=grid_h, 1, -1 do
for x=grid_w, 1, -1 do
local rp = refreshPosUp(x, y);
srClickMouseNoMove(rp[0], rp[1], 0);
lsSleep(refocus_click_time);
end
end
lsSleep(refocus_time); -- Wait for last window to bring to the foreground before clicking again
local did_harvest=false;
local water_step = 0;
while not did_harvest do
-- Monitor for Weed This/etc
water_step = water_step + 1;
for y=1, grid_h do
for x=1, grid_w do
statusScreen("(" .. loop_count .. "/" .. num_loops .. ") Weeding/Harvest step " .. water_step);
local pp = pinnedPos(x, y);
local rp = refreshPosDown(x, y);
local seeds_retry=3;
while 1 do
srClickMouseNoMove(rp[0], rp[1], 0);
lsSleep(screen_refresh_time);
srReadScreen();
local weed = srFindImageInRange(imgWeed, pp[0], pp[1] - 50, 120, 100);
if weed then
srClickMouseNoMove(weed[0] + 5, weed[1], 0);
break;
end
local weed = srFindImageInRange(imgWeedAndWater, pp[0], pp[1] - 50, 120, 100);
if weed then
srClickMouseNoMove(weed[0] + 5, weed[1], 0);
break;
end
local harvest = srFindImageInRange(imgHarvest, pp[0], pp[1] - 50, 110, 100);
if harvest then
srClickMouseNoMove(harvest[0] + 5, harvest[1], 0);
srClickMouseNoMove(pp[0], pp[1], 1); -- unpin
did_harvest = true;
break;
end
local seeds = srFindImageInRange(imgSeeds, pp[0], pp[1] - 50, 120, 100);
if seeds then
seeds_retry = seeds_retry - 1;
if (seeds_retry == 0) then
if nil then -- Don't do this, it causes us to walk out of range of the rest!
lsPrintln('Went to seed, grabbing the seeds and ignoring.');
srClickMouseNoMove(seeds[0] + 5, seeds[1], 0);
end
srSetMousePos(pp[0]+5, pp[1]+37);
lsSleep(100);
srClickMouseNoMove(pp[0]+5, pp[1]+37, 0); -- Utility
lsSleep(100);
srReadScreen();
local rip = srFindImage("FlaxRipOut.png");
if rip then
srClickMouseNoMove(rip[0] + 5, rip[1] + 2, 0); -- Rip out
else
error 'Flax went to seed, but failed to find rip out option';
end
lsSleep(100);
srClickMouseNoMove(pp[0]-3, pp[1], 1); -- unpin
went_to_seeds = 1;
did_harvest = true;
break;
end
end
checkBreak();
end
end
end
-- Bring windows to front
if not did_harvest then
statusScreen("(" .. loop_count .. "/" .. num_loops .. ") Refocusing windows...");
for y=grid_h, 1, -1 do
for x=grid_w, 1, -1 do
local rp = refreshPosUp(x, y);
srClickMouseNoMove(rp[0], rp[1], 0);
lsSleep(refocus_click_time);
end
end
lsSleep(refocus_time); -- Wait for last window to bring to the foreground before clicking again
end
end
lsSleep(2500); -- Wait for last flax bed to disappear before accidentally clicking on it!
statusScreen("(" .. loop_count .. "/" .. num_loops .. ") Walking...");
if went_to_seeds == 0 then
-- Walk back
for x=1, x_pos do
srClickMouseNoMove(xyCenter[0] + walk_px_x*-1, xyCenter[1], 0);
lsSleep(walk_time);
end
for x=1, -y_pos do
srClickMouseNoMove(xyCenter[0], xyCenter[1] + walk_px_y, 0);
lsSleep(walk_time);
end
end
if went_to_seeds and not loop_count == num_loops then
error 'Some of the plants went to seeds, stopping loop'
end
end
lsPlaySound("Complete.wav");
end
flax_seeds.lua
-- This script has not yet been updated to use the new UI utilties
-- See flax.lua instead
-- Edit these first 3 to adjust how much is planted in a pass and how many passes
-- May need to adjust walk_time in flax_common.inc if you move too slowly to keep up
-- grids tested up to 7x7, can probably do more
grid_w = 5;
grid_h = 5;
harvest_seeds_time = 1300;
loadfile("luaScripts/flax_common.inc")();
loadfile("luaScripts/screen_reader_common.inc")();
loadfile("luaScripts/ui_utils.inc")();
-- Harvest seeds
function doit()
--num_loops = promptNumber("How many " .. grid_w .. "x" .. grid_h .. " passes ?", 5);
promptFlaxNumbers(false);
askForWindow("Make sure the plant flax window is pinned and you are in F8F8 cam zoomed in. You may need to F12 at low resolutions or hide your chat window (if it starts planting and fails to move downward, it probably clicked on your chat window). Will plant grid NE of current location. 'Plant all crops where you stand' must be ON. 'Right click pins/unpins a menu' must be ON.");
initGlobals();
srReadScreen();
local xyPlantFlax = srFindImage(imgFlax1);
if not xyPlantFlax then
xyPlantFlax = srFindImage(imgFlax2);
if not xyPlantFlax then
error 'Could not find plant window';
end
end
xyPlantFlax[0] = xyPlantFlax[0] + 5;
local xyCenter = getCenterPos();
local xyFlaxMenu = {};
xyFlaxMenu[0] = xyCenter[0] - 43;
xyFlaxMenu[1] = xyCenter[1] + 0;
-- for spiral
local dxi=1;
local dt_max=grid_w;
local dt=grid_w;
local dx={1, 0, -1, 0};
local dy={0, -1, 0, 1};
local num_at_this_length = 3;
local x_pos = 0;
local y_pos = 0;
-- Plant and pin
for y=1, grid_h do
for x=1, grid_w do
lsPrintln('doing ' .. x .. ',' .. y);
statusScreen("Planting...");
-- Plant
lsPrintln('planting ' .. xyPlantFlax[0] .. ',' .. xyPlantFlax[1]);
setWaitSpot(xyFlaxMenu[0], xyFlaxMenu[1]);
srClickMouseNoMove(xyPlantFlax[0], xyPlantFlax[1], 0);
srSetMousePos(xyFlaxMenu[0], xyFlaxMenu[1]);
waitForChange();
-- lsSleep(delay_time);
-- Bring up menu
lsPrintln('menu ' .. xyFlaxMenu[0] .. ',' .. xyFlaxMenu[1]);
setWaitSpot(xyFlaxMenu[0]+5, xyFlaxMenu[1]);
srClickMouse(xyFlaxMenu[0], xyFlaxMenu[1], 0);
waitForChange();
-- lsSleep(delay_time);
-- Pin
lsPrintln('pin ' .. (xyFlaxMenu[0]+5) .. ',' .. xyFlaxMenu[1]);
srClickMouseNoMove(xyFlaxMenu[0]+5, xyFlaxMenu[1]+0, 1);
-- lsSleep(delay_time);
-- Check for window size
checkWindowSize(xyFlaxMenu[0], xyFlaxMenu[1]);
-- Move window
local pp = pinnedPos(x, y);
lsPrintln('move ' .. (xyFlaxMenu[0]+5) .. ',' .. xyFlaxMenu[1] .. ' to ' .. pp[0] .. ',' .. pp[1]);
drag(xyFlaxMenu[0] + 5, xyFlaxMenu[1],
pp[0], pp[1], 0);
-- lsSleep(delay_time);
-- move to next position
if not ((x == grid_w) and (y == grid_h)) then
lsPrintln('walking dx=' .. dx[dxi] .. ' dy=' .. dy[dxi]);
x_pos = x_pos + dx[dxi];
y_pos = y_pos + dy[dxi];
srClickMouseNoMove(xyCenter[0] + walk_px_x*dx[dxi], xyCenter[1] + walk_px_y*dy[dxi], 0);
lsSleep(walk_time);
dt = dt - 1;
if dt == 1 then
dxi = dxi + 1;
num_at_this_length = num_at_this_length - 1;
if num_at_this_length == 0 then
dt_max = dt_max - 1;
num_at_this_length = 2;
end
if dxi == 5 then
dxi = 1;
end
dt = dt_max;
end
else
lsPrintln('skipping walking, on last leg');
end
end
if (lsShiftHeld() and lsControlHeld()) then
error 'broke out of loop from Shift+Ctrl';
end
end
for loop_count=1, num_loops do
statusScreen("(" .. loop_count .. "/" .. num_loops .. ") Refocusing");
-- Bring windows to front
for y=grid_h, 1, -1 do
for x=grid_w, 1, -1 do
local rp = refreshPosUp(x, y);
srClickMouseNoMove(rp[0], rp[1], 0);
lsSleep(refocus_click_time);
end
end
lsSleep(refocus_time); -- Wait for last window to bring to the foreground before continuing
-- And harvest
for y=1, grid_h do
for x=1, grid_w do
statusScreen("(" .. loop_count .. "/" .. num_loops .. ") Harvesting " .. x .. ", " .. y);
local pp = pinnedPos(x, y);
local rp = refreshPosDown(x, y);
while 1 do
srClickMouseNoMove(rp[0], rp[1], 0);
lsSleep(screen_refresh_time);
srReadScreen();
local seeds = srFindImageInRange(imgSeeds, pp[0], pp[1] - 50, 160, 100);
if seeds then
srClickMouseNoMove(seeds[0] + 5, seeds[1], 0);
lsSleep(harvest_seeds_time);
break;
end
checkBreak();
end
end
end
end
statusScreen("Refocusing");
-- Bring windows to front
for y=grid_h, 1, -1 do
for x=grid_w, 1, -1 do
local rp = refreshPosUp(x, y);
srClickMouseNoMove(rp[0], rp[1], 0);
lsSleep(refocus_click_time);
end
end
lsSleep(refocus_time); -- Wait for last window to bring to the foreground before continuing
-- and clean up!
for y=1, grid_h do
for x=1, grid_w do
local rp = refreshPosDown(x, y);
srClickMouseNoMove(rp[0], rp[1], 1); -- unpin
lsSleep(refocus_click_time);
checkBreak();
end
end
lsPlaySound("Complete.wav");
end
flax_common.inc
-- Also using these for other planting automation
xyWindowSize = srGetWindowSize();
imgFlax1 = "FlaxOldEgypt.png";
imgFlax2 = "FlaxNileGreen.png";
imgHarvest = "HarvestThisFlax.png";
imgWeedAndWater = "WeedAndWater.png";
imgWeed = "WeedThisFlaxBed.png";
imgSeeds = "HarvestSeeds.png";
imgHarvestThese = "HarvestThese.png";
imgWeedThese = "WeedThese.png";
delay_time = 100;
screen_refresh_time = 110;
walk_px_y = 340;
walk_px_x = 380;
walk_y_drift = 18;
walk_x_drift = 14;
walk_time = 570;
refocus_time = 500;
refocus_click_time = 100;
function initGlobals()
pixel_scale = xyWindowSize[0] / 1720; -- Macro written with 1720 pixel wide window
lsPrintln("pixel_scale " .. pixel_scale);
walk_px_y = math.floor(walk_px_y * pixel_scale);
walk_px_x = math.floor(walk_px_x * pixel_scale);
if (lsScreenX < 1280) then
-- Have to click way off center in order to not move at high resoltuions
walk_y_drift = math.floor(walk_y_drift * pixel_scale);
walk_x_drift = math.floor(walk_x_drift * pixel_scale);
else
-- Very little drift at these resolutions, clicking dead center barely moves
walk_y_drift = 1;
walk_x_drift = 1;
end
end
-- The flax bed window
-- T4, guilded?: window_w = 166;
-- T4, guilded?: window_h = 116;
window_w = 174;
window_h = 100;
refresh_down_y_offs = 4;
refresh_up_y_offs = 0;
-- adjust if "plant all guild owned" option is enabled
window_check_done_once = false;
function checkWindowSize(x, y)
if not window_check_done_once then
srReadScreen();
window_check_done_once = true;
local pos = srFindImageInRange("UseableBy.png", x-5, y-50, 150, 100)
if pos then
window_w = 166;
window_h = 116;
end
end
end
-- position to drag window to
function pinnedPos(x, y)
local ret = {};
ret[0] = xyWindowSize[0] - 25*(x-1) - (window_w - 5);
ret[1] = (y-1)*14 + (window_h/2) + 2;
lsPrintln("pinnedPos(" .. x .. "," .. y .. ")=" .. ret[0] .. "," .. ret[1]);
return ret;
end
function refreshPosUp(x, y)
local ret = pinnedPos(x, y);
ret[0] = ret[0] + (window_w - 15);
ret[1] = ret[1] - (window_h/2 - 4); -- - (window_h - 66) + refresh_up_y_offs; -- 50 for flax;
lsPrintln("refreshPosUp(" .. x .. "," .. y .. ")=" .. ret[0] .. "," .. ret[1]);
return ret;
end
function refreshPosDown(x, y)
local ret = pinnedPos(x, y);
ret[0] = ret[0] - 2;
ret[1] = ret[1] + (window_h / 2) - refresh_down_y_offs;
lsPrintln("refreshPosDown(" .. x .. "," .. y .. ")=" .. ret[0] .. "," .. ret[1]);
return ret;
end
function getCenterPos()
local ret = {};
ret[0] = xyWindowSize[0] / 2 - walk_x_drift;
ret[1] = xyWindowSize[1] / 2 + walk_y_drift;
return ret;
end
function setWaitSpot(x0, y0)
setWaitSpot_x = x0;
setWaitSpot_y = y0;
setWaitSpot_px = srReadPixel(x0, y0);
end
function waitForChange()
local c=0;
while srReadPixel(setWaitSpot_x, setWaitSpot_y) == setWaitSpot_px do
lsSleep(1);
c = c+1;
if (lsShiftHeld() and lsControlHeld()) then
error 'broke out of loop from Shift+Ctrl';
end
end
lsPrintln('Waited ' .. c .. 'ms for pixel to change.');
end
function drag(x0, y0, x1, y1)
srSetMousePos(x0, y0);
setWaitSpot(x1, y1);
srMouseDown(x0, y0, 0);
-- lsSleep(15);
srSetMousePos(x1, y1);
-- lsSleep(50);
waitForChange();
srMouseUp(x0, y0, 0);
-- lsSleep(50);
end
function promptFlaxNumbers(is_plant)
scale = 1.0;
local z = 0;
local is_done = nil;
local value = nil;
-- Edit box and text display
while not is_done do
-- Put these everywhere to make sure we don't lock up with no easy way to escape!
checkBreak("disallow pause");
lsPrint(10, 10, z, scale, scale, 0xFFFFFFff, "Choose passes and grid size");
-- lsEditBox needs a key to uniquely name this edit box
-- let's just use the prompt!
-- lsEditBox returns two different things (a state and a value)
local y = 40;
lsPrint(5, y, z, scale, scale, 0xFFFFFFff, "Passes:");
is_done, num_loops = lsEditBox("passes",
100, y, z, 50, 30, scale, scale,
0x000000ff, 5);
if not tonumber(num_loops) then
is_done = nil;
lsPrint(10, y+18, z+10, 0.7, 0.7, 0xFF2020ff, "MUST BE A NUMBER");
num_loops = 1;
end
y = y + 32;
lsPrint(5, y, z, scale, scale, 0xFFFFFFff, "Grid size:");
is_done, grid_w = lsEditBox("grid",
100, y, z, 50, 30, scale, scale,
0x000000ff, grid_w);
if not tonumber(grid_w) then
is_done = nil;
lsPrint(10, y+18, z+10, 0.7, 0.7, 0xFF2020ff, "MUST BE A NUMBER");
grid_w = 1;
grid_h = 1;
end
grid_w = tonumber(grid_w);
grid_h = grid_w;
y = y + 32;
if lsButtonText(170, y-32, z, 100, 0xFFFFFFff, "OK") then
is_done = 1;
end
if is_plant then
lsPrintWrapped(10, y, z+10, lsScreenX - 20, 0.7, 0.7, 0xD0D0D0ff, "This will plant and harvest a " .. grid_w .. "x" .. grid_w .. " grid of Flax " .. num_loops .. " times, requiring " .. (grid_w * grid_w * num_loops) .. " seeds, doing " .. (grid_w*grid_w*num_loops) .. " flax harvests.");
else
lsPrintWrapped(10, y, z+10, lsScreenX - 20, 0.7, 0.7, 0xD0D0D0ff, "This will plant a " .. grid_w .. "x" .. grid_w .. " grid of Flax " .. num_loops .. " times, requiring " .. (grid_w * grid_w) .. " seeds, yielding " .. (grid_w * grid_w * num_loops) .. " seeds.");
end
if is_done and (not num_loops or not grid_w) then
error 'Canceled';
end
if lsButtonText(lsScreenX - 110, lsScreenY - 30, z, 100, 0xFFFFFFff, "End script") then
error "Clicked End Script button";
end
lsDoFrame();
lsSleep(10); -- Sleep just so we don't eat up all the CPU for no reason
end
end
