Crematory Macro/Crematory Macro

// This currently works for my screen resolution 1600x1200 with ATITD in windowed mode
// Pin the crematory window in the upper left of the screen as far into the corner as possible
// Load with stuff manually and make sure the window is fully refreshed so that the 
// "fire crematory" button appears and there is no slider bar!

// Start the macro - it will click the fire button which will also bring ATITD to the top
// Once the crematory has finished go back to ACTOOL and stop the macro - it currently just 
// has a huge crude loop - it would be relatively easy to monitor the progress bar but I 
// haven't done that yet

// For different screen resolutions I guess use "pixie" or something similar to get coords
// Need to change slider and button numbers under slider control for your particular crematory
// (The wiki explains how to analyse your crematory)

//SACFAR:
//Sliders numbered left-to-right 1-7.
//Buttons labeled left-to-right 1-5.

//Button 1 -> 1
//Button 2 -> 2, 7
//Button 3 -> 3
//Button 4 -> 2
//Button 5 -> 



	Constants 



		//Make sure the "Take..." option is NOT in the pinup menu or else this script will fail
		//(burn your loaded resources).
		//Make sure the crematory is completely empty before pinning up the menu, in the upper left corner.
		//More instructions/screenshots at http://www.atitd.org/wiki/tale5/User:KasumiGhia/Macros/Crematory

		//These settings will work on 1600x1200 windowed. Only change these it you want it work
		//at a different resolution.

		// Vertical position of middle of slider bar
		midSlider = 249

		// Vertical position of button centres
		vrtButton = 329

		// Horizontal positions of seven slider bars
		hrzSlider1 = 30
		hrzSlider2 = 66
		hrzSlider3 = 102
		hrzSlider4 = 138
		hrzSlider5 = 174
		hrzSlider6 = 210
		hrzSlider7 = 246


		// Horizontal positions of five button centres
		hrzButton1 = 57
		hrzButton2 = 98
		hrzButton3 = 137
		hrzButton4 = 177
		hrzButton5 = 217


		// Position of left most point of red line
		hrzRed = 34
		verRed = 159



		//Leave these alone
		count = 0
		counthi = 0
		countlo = 0
		clickflag = 0
		flag = 1
		posSlider1 = 0
		posSlider2 = 0
		posSlider3 = 0
		posSlider4 = 0
		posSlider5 = 0
		posSlider6 = 0
		posSlider7 = 0
		comSlider1 = 0
		comSlider2 = 0
		absSlider1 = 0
		absSlider2 = 0
		posSlider1old = 0
		posSlider2old = 0
		posSlider3old = 0
		posSlider4old = 0
		posSlider5old = 0
		posSlider6old = 0
		posSlider7old = 0
		comSlider1old = 0
		comSlider2old = 0
		absSlider1old = 0
		absSlider2old = 0
	END



//Click the top of menu to refresh the menu
mousepos 120, 44
delay 200
LeftClick


// Clicks to fire the crematory (need to specify centre of fire button)
mousepos 65, 71
delay 200
LeftClick

// First call to obtain initial positions of sliders
call GETSLIDERPOS
Compute posSlider1old = $posSlider1
Compute posSlider2old = $posSlider2
Compute posSlider3old = $posSlider3
Compute posSlider4old = $posSlider4
Compute posSlider5old = $posSlider5
Compute posSlider6old = $posSlider6
Compute posSlider7old = $posSlider7
Compute comSlider1old = ($posSlider3 + $posSlider7)/2
Compute comSlider2old = ($posSlider5 + $posSlider6)/2

// Crude loop at the moment. Should really monitor the progress bar. 

loop 500


	//Credit to Daniels for this sniplet of code to watch the red progress bar
	//and exit script when the bar disappears (when done).

	// Checks whether the batch is done, breaks loop if so
	LoadRGB $hrzRed,$verRed
	delay 100
	if {RGBRed} < 250
		break
	END




	call GETSLIDERPOS

// One slider per button control
// Need to alter slider and button numbers for particular crematory


//1st single slider/button combo:

	if $posSlider1 > 0
		if $posSlider1 > $posSlider1old
			mousepos $hrzButton1,$vrtButton
			delay 200
			LeftClick
		END
	END
	if $posSlider1 < 0
		if $posSlider1 < $posSlider2old
			mousepos $hrzButton1,$vrtButton
			delay 200
			LeftClick
		END
	END


//2nd single slider/button combo:

	if $posSlider4 > 0
		if $posSlider4 > $posSlider4old
			mousepos $hrzButton3,$vrtButton
			delay 200
			LeftClick
		END
	END
	if $posSlider4 < 0
		if $posSlider4 < $posSlider4old
			mousepos $hrzButton3,$vrtButton
			delay 200
			LeftClick
		END
	END


//3rd single slider/button combo:

	if $posSlider2 > 0
		if $posSlider2 > $posSlider5old
			mousepos $hrzButton4,$vrtButton
			delay 200
			LeftClick
		END
	END
	if $posSlider2 < 0
		if $posSlider2 < $posSlider2old
			mousepos $hrzButton4,$vrtButton
			delay 200
			LeftClick
		END
	END

// Two sliders per button control (use centre of mass, i.e. average)
// Need to alter slider and button numbers for particular crematory
//Note Editing a slider number is $posSlider#, not comSlider#.
//     Do not change the 1 or 2 on $comSlider1 and $comSlider2

//1st two slider/one button combo:

	Compute comSlider1 = ($posSlider3 + $posSlider7)/2
	Compute absSlider1 = abs($posSlider3) + abs($posSlider7)
	Compute clickflag = 0
	if $absSlider1 > $absSlider1old
	  Compute clickflag=1
	END
	if $hrzRed > 50000
	if $comSlider1 > 0
	  if $posSlider3 > 0 and $posSlider7 > 0 
	  	if $comSlider1 > $comSlider1old
	  		Compute clickflag = 1
	  	END
		else
			if $posSlider3 > 0 and $posSlider3 > $posSlider1old
				Compute clickflag = 1
			END
			if $posSlider7 > 0 and $posSlider7 > $posSlider7old
				Compute clickflag = 1
			END
		END
	END
	if $comSlider1 < 0
	  if $posSlider3 < 0 and $posSlider7 < 0 
	  	if $comSlider1 < $comSlider1old
	  		Compute clickflag = 1
	  	END
		else
			if $posSlider3 < 0 and $posSlider3 < $posSlider1old
				Compute clickflag = 1
			END
			if $posSlider7 < 0 and $posSlider7 < $posSlider7old
				Compute clickflag = 1
			END
		END
	END
  END //if 0
  if $clickflag = 1
			mousepos $hrzButton2,$vrtButton
			delay 200
			LeftClick
	END


//2nd two slider/one button combo:

	Compute comSlider2 = ($posSlider5 + $posSlider6)/2
	Compute absSlider2 = abs($posSlider5) + abs($posSlider6)
	Compute clickflag = 0
	if $absSlider2 > $absSlider2old
	  Compute clickflag=1
	END
	if $hrzRed > 50000
	if $comSlider2 > 0
	  if $posSlider5 > 0 and $posSlider6 > 0 
	  	if $comSlider2 > $comSlider2old
	  		Compute clickflag = 1
	  	END
	  else
			if $posSlider5 > 0 and $posSlider5 > $posSlider4old
				Compute clickflag = 1
			END
			if $posSlider6 > 0 and $posSlider6 > $posSlider6old
				Compute clickflag = 1
			END
		END
	END
	if $comSlider2 < 0
		if $posSlider5 < 0 and $posSlider6 < 0 
	  	if $comSlider2 < $comSlider2old
	  		Compute clickflag = 1
	  	END
	  else
			if $posSlider5 < 0 and $posSlider5 < $posSlider4old
				Compute clickflag = 1
			END
			if $posSlider6 < 0 and $posSlider6 < $posSlider6old
				Compute clickflag = 1
			END
		END
	END
  END //if 0
  if $clickflag = 1
			mousepos $hrzButton5,$vrtButton
			delay 200
			LeftClick
	END




	Compute posSlider1old = $posSlider1
	Compute posSlider2old = $posSlider2
	Compute posSlider3old = $posSlider3
	Compute posSlider4old = $posSlider4
	Compute posSlider5old = $posSlider5
	Compute posSlider6old = $posSlider6
	Compute posSlider7old = $posSlider7
	Compute comSlider1old = $comSlider1
	Compute comSlider2old = $comSlider2
	Compute absSlider1old = $absSlider1
	Compute absSlider2old = $absSlider2


END

// Procedure to find slider positions

Procedure GETSLIDERPOS
	
	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider1, $midSlider
			Compute posSlider1 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 1
		IsBlack $hrzSlider1, $counthi
			Compute posSlider1 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 1
		IsBlack $hrzSlider1, $countlo
			Compute posSlider1 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider2, $midSlider
			Compute posSlider2 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 1
		IsBlack $hrzSlider2, $counthi
			Compute posSlider2 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 1
		IsBlack $hrzSlider2, $countlo
			Compute posSlider2 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider3, $midSlider
			Compute posSlider3 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 1
		IsBlack $hrzSlider3, $counthi
			Compute posSlider3 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 1
		IsBlack $hrzSlider3, $countlo
			Compute posSlider3 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider4, $midSlider
			Compute posSlider4 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 1
		IsBlack $hrzSlider4, $counthi
			Compute posSlider4 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 1
		IsBlack $hrzSlider4, $countlo
			Compute posSlider4 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider5, $midSlider
			Compute posSlider5 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 1
		IsBlack $hrzSlider5, $counthi
			Compute posSlider5 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 1
		IsBlack $hrzSlider5, $countlo
			Compute posSlider5 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider6, $midSlider
			Compute posSlider6 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 1
		IsBlack $hrzSlider6, $counthi
			Compute posSlider6 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 1
		IsBlack $hrzSlider6, $countlo
			Compute posSlider6 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider7, $midSlider
			Compute posSlider7 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 1
		IsBlack $hrzSlider7, $counthi
			Compute posSlider7 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 1
		IsBlack $hrzSlider7, $countlo
			Compute posSlider7 = $midSlider - $countlo
			Compute flag = 0
		END
	END

END