The Wiki for Tale 5 is in read-only mode and is available for archival and reference purposes only. Please visit the current Tale 11 Wiki in the meantime.

If you have any issues with this Wiki, please post in #wiki-editing on Discord or contact Brad in-game.

Crematory Macro/Crematory Macro

From ATITD5
Revision as of 10:21, 7 May 2011 by Sabahl (talk | contribs) (Created page with "<pre> // This currently works for my screen resolution 1600x1200 with ATITD in windowed mode // Pin the crematory window in the upper left of the screen as far into the corner as...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
// This currently works for my screen resolution 1600x1200 with ATITD in windowed mode
// Pin the crematory window in the upper left of the screen as far into the corner as possible
// Load with stuff manually and make sure the window is fully refreshed so that the 
// "fire crematory" button appears and there is no slider bar!

// Start the macro - it will click the fire button which will also bring ATITD to the top
// Once the crematory has finished go back to ACTOOL and stop the macro - it currently just 
// has a huge crude loop - it would be relatively easy to monitor the progress bar but I 
// haven't done that yet

// For different screen resolutions I guess use "pixie" or something similar to get coords
// Need to change slider and button numbers under slider control for your particular crematory
// (The wiki explains how to analyse your crematory)

//SACFAR:
//Sliders numbered left-to-right 1-7.
//Buttons labeled left-to-right 1-5.

//Button 1 -> 1
//Button 2 -> 2, 7
//Button 3 -> 3
//Button 4 -> 2
//Button 5 -> 



	Constants 



		//Make sure the "Take..." option is NOT in the pinup menu or else this script will fail
		//(burn your loaded resources).
		//Make sure the crematory is completely empty before pinning up the menu, in the upper left corner.
		//More instructions/screenshots at http://www.atitd.org/wiki/tale5/User:KasumiGhia/Macros/Crematory

		//These settings will work on 1600x1200 windowed. Only change these it you want it work
		//at a different resolution.

		// Vertical position of middle of slider bar
		midSlider = 249

		// Vertical position of button centres
		vrtButton = 329

		// Horizontal positions of seven slider bars
		hrzSlider1 = 30
		hrzSlider2 = 66
		hrzSlider3 = 102
		hrzSlider4 = 138
		hrzSlider5 = 174
		hrzSlider6 = 210
		hrzSlider7 = 246


		// Horizontal positions of five button centres
		hrzButton1 = 57
		hrzButton2 = 98
		hrzButton3 = 137
		hrzButton4 = 177
		hrzButton5 = 217


		// Position of left most point of red line
		hrzRed = 34
		verRed = 159



		//Leave these alone
		count = 0
		counthi = 0
		countlo = 0
		clickflag = 0
		flag = 1
		posSlider1 = 0
		posSlider2 = 0
		posSlider3 = 0
		posSlider4 = 0
		posSlider5 = 0
		posSlider6 = 0
		posSlider7 = 0
		comSlider1 = 0
		comSlider2 = 0
		absSlider1 = 0
		absSlider2 = 0
		posSlider1old = 0
		posSlider2old = 0
		posSlider3old = 0
		posSlider4old = 0
		posSlider5old = 0
		posSlider6old = 0
		posSlider7old = 0
		comSlider1old = 0
		comSlider2old = 0
		absSlider1old = 0
		absSlider2old = 0
	END



//Click the top of menu to refresh the menu
mousepos 120, 44
delay 200
LeftClick


// Clicks to fire the crematory (need to specify centre of fire button)
mousepos 65, 71
delay 200
LeftClick

// First call to obtain initial positions of sliders
call GETSLIDERPOS
Compute posSlider1old = $posSlider1
Compute posSlider2old = $posSlider2
Compute posSlider3old = $posSlider3
Compute posSlider4old = $posSlider4
Compute posSlider5old = $posSlider5
Compute posSlider6old = $posSlider6
Compute posSlider7old = $posSlider7
Compute comSlider1old = ($posSlider3 + $posSlider7)/2
Compute comSlider2old = ($posSlider5 + $posSlider6)/2

// Crude loop at the moment. Should really monitor the progress bar. 

loop 500


	//Credit to Daniels for this sniplet of code to watch the red progress bar
	//and exit script when the bar disappears (when done).

	// Checks whether the batch is done, breaks loop if so
	LoadRGB $hrzRed,$verRed
	delay 100
	if {RGBRed} < 250
		break
	END




	call GETSLIDERPOS

// One slider per button control
// Need to alter slider and button numbers for particular crematory


//1st single slider/button combo:

	if $posSlider1 > 0
		if $posSlider1 > $posSlider1old
			mousepos $hrzButton1,$vrtButton
			delay 200
			LeftClick
		END
	END
	if $posSlider1 < 0
		if $posSlider1 < $posSlider2old
			mousepos $hrzButton1,$vrtButton
			delay 200
			LeftClick
		END
	END


//2nd single slider/button combo:

	if $posSlider4 > 0
		if $posSlider4 > $posSlider4old
			mousepos $hrzButton3,$vrtButton
			delay 200
			LeftClick
		END
	END
	if $posSlider4 < 0
		if $posSlider4 < $posSlider4old
			mousepos $hrzButton3,$vrtButton
			delay 200
			LeftClick
		END
	END


//3rd single slider/button combo:

	if $posSlider2 > 0
		if $posSlider2 > $posSlider5old
			mousepos $hrzButton4,$vrtButton
			delay 200
			LeftClick
		END
	END
	if $posSlider2 < 0
		if $posSlider2 < $posSlider2old
			mousepos $hrzButton4,$vrtButton
			delay 200
			LeftClick
		END
	END

// Two sliders per button control (use centre of mass, i.e. average)
// Need to alter slider and button numbers for particular crematory
//Note Editing a slider number is $posSlider#, not comSlider#.
//     Do not change the 1 or 2 on $comSlider1 and $comSlider2

//1st two slider/one button combo:

	Compute comSlider1 = ($posSlider3 + $posSlider7)/2
	Compute absSlider1 = abs($posSlider3) + abs($posSlider7)
	Compute clickflag = 0
	if $absSlider1 > $absSlider1old
	  Compute clickflag=1
	END
	if $hrzRed > 50000
	if $comSlider1 > 0
	  if $posSlider3 > 0 and $posSlider7 > 0 
	  	if $comSlider1 > $comSlider1old
	  		Compute clickflag = 1
	  	END
		else
			if $posSlider3 > 0 and $posSlider3 > $posSlider1old
				Compute clickflag = 1
			END
			if $posSlider7 > 0 and $posSlider7 > $posSlider7old
				Compute clickflag = 1
			END
		END
	END
	if $comSlider1 < 0
	  if $posSlider3 < 0 and $posSlider7 < 0 
	  	if $comSlider1 < $comSlider1old
	  		Compute clickflag = 1
	  	END
		else
			if $posSlider3 < 0 and $posSlider3 < $posSlider1old
				Compute clickflag = 1
			END
			if $posSlider7 < 0 and $posSlider7 < $posSlider7old
				Compute clickflag = 1
			END
		END
	END
  END //if 0
  if $clickflag = 1
			mousepos $hrzButton2,$vrtButton
			delay 200
			LeftClick
	END


//2nd two slider/one button combo:

	Compute comSlider2 = ($posSlider5 + $posSlider6)/2
	Compute absSlider2 = abs($posSlider5) + abs($posSlider6)
	Compute clickflag = 0
	if $absSlider2 > $absSlider2old
	  Compute clickflag=1
	END
	if $hrzRed > 50000
	if $comSlider2 > 0
	  if $posSlider5 > 0 and $posSlider6 > 0 
	  	if $comSlider2 > $comSlider2old
	  		Compute clickflag = 1
	  	END
	  else
			if $posSlider5 > 0 and $posSlider5 > $posSlider4old
				Compute clickflag = 1
			END
			if $posSlider6 > 0 and $posSlider6 > $posSlider6old
				Compute clickflag = 1
			END
		END
	END
	if $comSlider2 < 0
		if $posSlider5 < 0 and $posSlider6 < 0 
	  	if $comSlider2 < $comSlider2old
	  		Compute clickflag = 1
	  	END
	  else
			if $posSlider5 < 0 and $posSlider5 < $posSlider4old
				Compute clickflag = 1
			END
			if $posSlider6 < 0 and $posSlider6 < $posSlider6old
				Compute clickflag = 1
			END
		END
	END
  END //if 0
  if $clickflag = 1
			mousepos $hrzButton5,$vrtButton
			delay 200
			LeftClick
	END




	Compute posSlider1old = $posSlider1
	Compute posSlider2old = $posSlider2
	Compute posSlider3old = $posSlider3
	Compute posSlider4old = $posSlider4
	Compute posSlider5old = $posSlider5
	Compute posSlider6old = $posSlider6
	Compute posSlider7old = $posSlider7
	Compute comSlider1old = $comSlider1
	Compute comSlider2old = $comSlider2
	Compute absSlider1old = $absSlider1
	Compute absSlider2old = $absSlider2


END

// Procedure to find slider positions

Procedure GETSLIDERPOS
	
	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider1, $midSlider
			Compute posSlider1 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 1
		IsBlack $hrzSlider1, $counthi
			Compute posSlider1 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 1
		IsBlack $hrzSlider1, $countlo
			Compute posSlider1 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider2, $midSlider
			Compute posSlider2 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 1
		IsBlack $hrzSlider2, $counthi
			Compute posSlider2 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 1
		IsBlack $hrzSlider2, $countlo
			Compute posSlider2 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider3, $midSlider
			Compute posSlider3 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 1
		IsBlack $hrzSlider3, $counthi
			Compute posSlider3 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 1
		IsBlack $hrzSlider3, $countlo
			Compute posSlider3 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider4, $midSlider
			Compute posSlider4 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 1
		IsBlack $hrzSlider4, $counthi
			Compute posSlider4 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 1
		IsBlack $hrzSlider4, $countlo
			Compute posSlider4 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider5, $midSlider
			Compute posSlider5 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 1
		IsBlack $hrzSlider5, $counthi
			Compute posSlider5 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 1
		IsBlack $hrzSlider5, $countlo
			Compute posSlider5 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider6, $midSlider
			Compute posSlider6 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 1
		IsBlack $hrzSlider6, $counthi
			Compute posSlider6 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 1
		IsBlack $hrzSlider6, $countlo
			Compute posSlider6 = $midSlider - $countlo
			Compute flag = 0
		END
	END

	Compute counthi = $midSlider
	Compute countlo = $midSlider
	Compute flag = 1
	IsBlack $hrzSlider7, $midSlider
			Compute posSlider7 = 0
			Compute flag = 0
	END	
	while $flag > 0
		Compute counthi = $counthi + 1
		IsBlack $hrzSlider7, $counthi
			Compute posSlider7 = $midSlider - $counthi
			Compute flag = 0
		END
		Compute countlo = $countlo - 1
		IsBlack $hrzSlider7, $countlo
			Compute posSlider7 = $midSlider - $countlo
			Compute flag = 0
		END
	END

END