The Wiki for Tale 5 is in read-only mode and is available for archival and reference purposes only. Please visit the current Tale 11 Wiki in the meantime.

If you have any issues with this Wiki, please post in #wiki-editing on Discord or contact Brad in-game.

User:Wopper87/links

From ATITD5
Jump to navigationJump to search

basic resources | herbs | insects | mushrooms | ore and refined metal | gems | resin | fireworks | need |


links

Shroomdar

recipes

foraging list

macros

below is links to most common macros list

T5 macros | T4 macros


my own macros i use

below are macros i have made or modified to fit my use. i use a 1900x1200 resolution in windowed mode and if it can be set used for anyone that is important to understand the mouse placement

i also use jimbly macro. most all work well

bunny catcher

-actools 

 // will drop carrots in a 5x5 grid to catch bunnies
 // make sure you have about 2 coord space from where you stand to the north and east
 // make sure you have 25 carrots
 // double f8 and zoom in
 // click self and click drop. pin the menu in top left corner
 // make sure carrots are at the top of list
 // alt tab to macro and press f2
 //alt tab to atitd (you have 4 seconds)
 // resolution 1900 x 1200 windowed mode


 // |u|r|r|r|r|      |^|>|>|>|>|
 // |u|u|r|r|d|      |^|^|>|>|v|
 // |u|u|U|d|d|  or  |^|^|^|v|v|
 // |u|u|L|d|d|      |^|^|<|v|v|
 // |u|L|L|L|d|      |^|<|<|<|v|

 delay 4000

 loop 5 // moves up 5 times
	
		KEYDOWN {UP} 200 //moves up for 2/10 of a second 
		MousePos 29, 38	 //you might have to change this and all the way down if it does not select carrot
		delay 500
		Leftclick
		delay 500
		KEYDOWN {RETURN} // selects the default quantity of one
 end

 loop 4 // moves right 4 times (5 including the one dropped in last loop)

		KEYDOWN {RIGHT} 200 //moves right 2/10 of a second
		MousePos 29, 38	 
		delay 500
		Leftclick
		delay 500
		KEYDOWN {RETURN} // selects the default quantity of one
 end

 loop 4 // moves down 4 times (5 including the one dropped in last loop)
		KEYDOWN {DOWN} 200 // moves down 2/10 of a second
		MousePos 29 , 38
		delay 500
		leftclick
		delay 500
		KEYDOWN {RETURN} // selects the default quantity of one
 end

 loop 3 // moves left 3 times (5 including the one dropped from last loop and one from first up row)
		KEYDOWN {LEFT} 200 // moves left 2/10 of a second
		MousePos 29 , 38
		delay 500
		leftclick
		delay 500
		KEYDOWN {RETURN} // selects the default quantity of one		
 end

 loop 3 // moves up 3 times (5 including the one dropped from last drop and one from the first right row)
		KEYDOWN {UP} 200 // moves up again
		MousePos 29 , 38
		delay 500
		leftclick
		delay 500
		KEYDOWN {RETURN}	// selects the default quantity of one	
 end

 loop 2 // moves right 2 times (5 including last loop and first down)
 KEYDOWN {RIGHT} 200 // moves right again
		MousePos 29 , 38
		delay 500
		leftclick
		delay 500
		KEYDOWN {RETURN} // selects the default quantity of one
 end

 loop 2 // moves down 2 times (5 including last loop and first left)
		KEYDOWN {DOWN} 200 // moves down again
		MousePos 29 , 38
		delay 500
		leftclick
		delay 500
		KEYDOWN {RETURN} // selects the default quantity of one
 end

		KEYDOWN {LEFT} 200 // moves left again one time 
		MousePos 29 , 38
		delay 500
		leftclick
		delay 500
		KEYDOWN {RETURN}	// selects the default quantity of one	
		
		KEYDOWN {up} 200 //moves up again one time and end in the middle
		MousePos 29 , 38
		delay 500
		leftclick
		delay 500
		KEYDOWN {RETURN} // selects the default quantity of one

cchearth

- written many times over i just adjusted for res. above

-actools 


//Charcoal Hearth
//         this is Anka's CC hearth Macro from T3
//         I've re-adjusted this macro to run in 1900x1200 resolution , only tried it with 2 hearths so far , but works fine.
//         Not lost a batch yet ( wopper87)
//				 also you will need to have hearths set to allow anyone to use otherwise you will need to adjust positions up a little
//
// Setup:  I've added a setup routine to the macro.  Pin the windows on top of each
//         other in the top left corner.  I suggest at least 200 wood per hearth (normally consumes 160)
//         and about 15 water per hearth to be safe.  All hearths are slightly
//         different but I suggest that you put your fastest burning hearths first
//         in line.  You can tweak the settings in the built in menu.
//
//         Hearths: Total number of hearths you are running.
//         Hearths Across: How many Hearths on the top row of windows.  Make sure
//                         you set this each time even if you are running 1 hearth.
//                         Variables in the macro are set off of this number.
//         Guilded?: Check this box if you are using guilded hearths.
//         Need Setup?: Check this box if you need the macro to position your
//                      windows that are stacked in top left corner.  This is
//                      usefull if you run another round on the hearths and your
//                      windows are set up already.  Check if needed or not.
//         Stealth Mouse: Check this if you don't want to see the mouse move around
//                        on the hearth windows.  When checked, it will save your
//                        mouse position, move to the spot it needs, perform its
//                        action then return the pointer to where it started.  Alows
//                        you to change chat windows are dig in chest while the
//                        macro is running :)
//         Heat: Threshold for Heat bar, increase or decrease as needed. If heat
//               reaches this lvl, water will be added.
//         Wood: Wood threshold, adds wood up to this point.
//         Water: Alowable water level, not much play here. If the water lvl is above
//                this lvl, water will not be added. Prevents drowning the hearth.
//         RGBGreen: Used to detect completion bar. If the macro adds a bunch of water
//                   before the macro is done then moves to the next hearth, increase
//                   this number. Or lower it if it doesnt see green.
//         RGBBlue: Works just like RGBGreen but for blue bars.  If the macro keeps
//                  adding wood till the hearth is full, it's not seeing blue.  If
//                  this happens, lower this number.  Other problem may be that the
//                  mouse pointer is not lining up over the bar correctly.  Run the
//                  Mouse Test.
//         Check Bars Interval: This is the pause time between bar checks.  The
//                              default value of 4000 works well for 1-8 hearths
//                              but you may need to decrease this number if you
//                              are running more than 8.
//         Mouse Test: This is to test if the mouse pointer is lining up correctly
//                     with your windows.  Run 1 hearth manually and start the macro
//                     with this option checked.  You don't need to worry about any
//                     other option.  It will move over the Heat, Wood, Water, Danger,
//                     and Status bar then over the Wood and Water buttons 10 times
//                     before it stops.  If these positions are off a bit, you can
//                     change the Y coordinates below in the constants section.
//
//         The macro doesn't watch Oxygen.  I was going to add a vent option but this
//         macro runs very well and never fails for me.  If your oxygen is getting too
//         high, try adding more wood.  But, by adding more wood, you add more heat
//         which may require you adding more water.  A small amount of water in the
//         presence of heat evaporates producing more Oxygen. :)  Find the balance
//         you want.
//
//  ENJOY! :)  
//  Anka
//
Constants
  //User Definable variables
  Hearths = 4
  HeatX = 165
  WoodX = 107
  WaterX = 76
  DangerX = 165
  RGBBlue = 220
  RGBGreen = 240
  Guild = 1
  
  // Y Coordinates - Don't change unless you are having a problem.

  RegY = 78    // Y coord for Regulator button
  BeginY = 254   // Y coord for Begin Button
  HeatY = 165   // Y coord for Heat Bar
  WoodY = 190   // Y coord for Wood Bar
  WaterY = 202 // Y coord for Water Bar
  DangerY = 214 // Y coord for Danger Bar
  StatusY = 226 // Y coord for Status Bar
  WoodBY = 261   // Y coord for Wood and Water buttons
  //End User variables
  
  Hrow = 0
  Hrow1 = 0
  AddX = 226
  Add2X = 15
  Add1Y = 65
  Add2Y = 17
  Add3Y = 250
  RegX = 47
  BeginX = 111
  NewX = 0
  New2X = 0
  New2Y = 0
  NewY = 0
  Heat = 0
  Wood = 0
  Water = 0
  Danger = 0
  Status = 0
  OxyY = 168
  StatusX = 167
  WoodBX = 35
  WaterBX = 85
  Num = 0
  Jump = 5
  JumpM = 0
  Jumped = 0
  Used = 0
  MDelay = 250
  SDelay = 200
  S1Delay = 100
  Count = 0
  CountM = 0
  MouseX = 0
  MouseY = 0
  CheckDelay = 0
  Setup = 0
  SetX = 10
  SetY = 40
  SetAddX = 227
  SetAddY = 250
  SetLoop = 0
  Mouse = 1
  OrigX = 0
  OrigY = 0
End

Form ccHearth, Settings
  ed1=Combobox:Hearths:1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
  ed13=Editbox:Hearths Across:4
  ed2=CheckBox:Guilded?:True
  ed14=Checkbox:Need Setup?:True
  ed15=Checkbox:Stealth Mouse:True
  ed3=Editbox:Heat     default 165  (75-188):165
  //ed10=Editbox:HeatMin            (75-188):116
  //ed11=Editbox:HeatMax           (75-188):184
  //ed4=Editbox:Low Oxy            (75-188):82
  //ed5=Editbox:High Oxy           (75-188):134
  ed6=Editbox:Wood     default 107  (75-188):107
  ed7=Editbox:Water    default 76 (75-188):76
  ed8=Editbox:RGBGreen:240
  ed9=Editbox:RGBBlue:220
  ed12=Editbox:Check Bars Interval  (miliseconds):4000
  ed16=Checkbox:Mouse Check:False
end
 
FormLoad ccHearth, ccHearth.frm 

if ShowForm ccHearth
  SetConst Hearths = ccHearth[ed1]
  If ccHearth[ed2] = True
    SetConst Guild = 1
  Else
    SetConst Guild = 0
  End
  SetConst HeatX = ccHearth[ed3]
  //SetConst Oxy1X = ccHearth[ed4]
  //SetConst Oxy2X = ccHearth[ed5]
  SetConst WoodX = ccHearth[ed6]
  SetConst WaterX = ccHearth[ed7]
  SetConst RGBGreen = ccHearth[ed8]
  SetConst RGBBlue = ccHearth[ed9]
  //SetConst HeatMin = ccHearth[ed10]
  //SetConst HeatMax = ccHearth[ed11]
  SetConst CheckDelay = ccHearth[ed12]
  Set HRow = ccHearth[ed13]
  Compute SetLoop = $Hearths - 1
  Compute HRow1 = $Hrow + 1
  If ccHearth[ed15] = True
    Set Mouse = 0
  End
else
  Stop
end 

FormSave ccHearth, ccHearth.frm 

MousePos 100, 20  //Activates eGenesis window.. Don't run ACTool maximized.
Delay $MDelay
LeftClick
Delay 2000   

If $Guild = 1
  Call Guild
End
if ccHearth[ed16] = True
  Call HearthTest
End
If ccHearth[ed14] = True
  Call Setup
End 

Call SetReg
SetConst NewX = $BeginX
SetConst NewY = $BeginY
SetConst Count = 1
Loop $Hearths
  If $Count = $HRow1 //$Jump
    SetConst NewX = $BeginX
    Compute NewY = $BeginY + $Add3Y
  End
  MousePos $NewX, $NewY
  Delay $MDelay
  Rightclick
  Delay $MDelay
  Compute NewX = $NewX + $AddX
  Compute Count = $Count + 1
End
SetConst NewX = $BeginX  //Dont remember why this is here :)
Call Main 

Procedure Setup
  Set NewX = $SetX
  Set NewY = $SetY
  Loop $SetLoop
    Mousepos $SetX, $SetY
    if {loopno} = $HRow
      Set NewX = $SetX
      Compute NewY = $SetY + $SetAddY
    else
      Compute NewX = $NewX + $SetAddX
    End
    Dragto $NewX, $NewY
  End
End

Procedure Main
  SetConst CountM = 1
  SetConst Status = 0
  Compute JumpM = $HRow1 - 1 //$Jump - 1
  Loop $Hearths
    If $CountM = $HRow1 //$Jump
      // may have to use New Newx and newy variables in Main
      SetConst NewX = $StatusX
      Compute NewY = $StatusY + $Add3Y
      SetConst New2X = $WaterBX
      Compute New2Y = $WoodBY + $Add3Y
    End
    
    While $Status = 0
      Call CheckBars
      If $Status = 1
        Call Snuff
        //code to advance to next hearth
        Compute Used = $Used + 1
        If $Used = $JumpM
          Compute HeatX = $HeatX - (($Used - 1) * $AddX)
          Compute HeatY = $HeatY + $Add3Y
          Compute WoodX = $WoodX - (($Used - 1) * $AddX)
          Compute WoodY = $WoodY + $Add3Y
          Compute WaterX = $WaterX - (($Used - 1) * $AddX)
          Compute WaterY = $WaterY + $Add3Y
          Compute DangerX = $DangerX - (($Used - 1) * $AddX)
          Compute DangerY = $DangerY + $Add3Y
          Compute StatusX = $StatusX - (($Used - 1) * $AddX)
          Compute StatusY = $StatusY + $Add3Y
          //Compute WaterBX = $WaterBX - (($Used -1) * $AddX)
          //Compute WoodBX = $WoodBX - (($Used - 1 ) * $AddX)
          //Compute WoodBY = $WoodBY + $Add3Y
          SetConst Jumped = 1
          Continue
        Else
          Compute HeatX = $HeatX + $AddX
          Compute WoodX = $WoodX + $AddX
          Compute WaterX = $WaterX + $AddX
          Compute DangerX = $DangerX + $AddX
          Compute StatusX = $StatusX + $AddX
          //Compute WaterBX = $WaterBX + $AddX
          //Compute WoodBX = $WoodBX + $AddX
        End
        Continue
      End
      If $Heat = 0 and $Danger = 0 and $Wood = 0
        Call Wood
      Else
        If $Heat = 1 or $Danger = 1
          If $Water = 0
            Call Water
          End
        End
      End
     
      Delay $CheckDelay
    End
    Compute CountM = $CountM + 1
    SetConst Status = 0
  End
End

Procedure CheckBars
  If $Mouse = 1
    MousePos $HeatX, $HeatY
    Delay $SDelay
  end
  LoadRGB $HeatX, $HeatY
  if {RGBBlue} > $RGBBlue
    SetConst Heat = 1
  Else
    SetConst Heat = 0
  End
  If $Mouse = 1
    MousePos $WoodX, $WoodY
    Delay $S1Delay
  end
  LoadRGB $WoodX, $WoodY
  if {RGBBlue} > $RGBBlue
    SetConst Wood = 1
  Else
    SetConst Wood = 0
  End
  If $Mouse = 1
    MousePos $WaterX, $WaterY
    Delay $S1Delay
  End
  LoadRGB $WaterX, $WaterY
  if {RGBBlue} > $RGBBlue
    SetConst Water = 1
  Else
    SetConst Water = 0
  End
  If $Mouse = 1
    MousePos $DangerX, $DangerY
    Delay $S1Delay
  End
  LoadRGB $DangerX, $DangerY
  if {RGBBlue} > $RGBBlue
    SetConst Danger = 1
  Else
    SetConst Danger = 0
  End
  If $Mouse = 1
    MousePos $StatusX, $StatusY
  End
  LoadRGB $StatusX, $StatusY
  if {RGBGreen} > $RGBGreen
    SetConst Status = 1
  Else
    SetConst Status = 0
  End
End

Procedure Water
  SetConst NewX = $WaterBX
  SetConst NewY = $WoodBY
  Loop $Hearths
    IF {loopno} = $HRow1 //$Jump
      SetConst NewX = $WaterBX
      Compute NewY = $WoodBY + $Add3Y
    End
    If {loopno} > $Used
      If $Mouse = 0
        Set OrigX = {mousex}
        Set OrigY = {mousey}
      End
      MousePos $NewX, $NewY
      Delay $SDelay
      Rightclick
      Delay $SDelay
      If $Mouse = 0
        Mousepos $OrigX, $OrigY
      End
    End
    Compute NewX = $NewX + $AddX
  End
  SetConst NewX = $WaterBX
End

Procedure Snuff
  SetConst New2X = $WaterBX
  SetConst New2Y = $WoodBY
  Compute Num = $Used + 1
  Loop $Hearths
    IF {loopno} = $Hrow1 //$Jump
      SetConst New2X = $WaterBX
      Compute New2Y = $WoodBY + $Add3Y
    End
    If {loopno} = $Num
      If $Mouse = 0
        Set OrigX = {mousex}
        Set OrigY = {mousey}
      End
      MousePos $New2X, $New2Y
      Loop 8
        Rightclick
      End
      If $Mouse = 0
        Mousepos $OrigX, $OrigY
      End
    End
    Compute New2X = $New2X + $AddX
  End
End 
 
Procedure Wood
  SetConst NewX = $WoodBX
  SetConst NewY = $WoodBY
  Loop $Hearths
    IF {loopno} = $HRow1 //$Jump
      SetConst NewX = $WoodBX
      Compute NewY = $WoodBY + $Add3Y
     End
    If {loopno} > $Used
      If $Mouse = 0
        Set OrigX = {mousex}
        Set OrigY = {mousey}
      End
      MousePos $NewX, $NewY
      Delay $SDelay
      Rightclick
      Delay $SDelay
      If $Mouse = 0
        MousePos $OrigX, $OrigY
      End
    End
    Compute NewX = $NewX + $AddX
  End
  SetConst NewX = $WoodBX
End
 
Procedure SetReg
  SetConst NewX = $RegX
  SetConst Count = 1
  Loop $Hearths
    If $Count = $HRow1
      SetConst NewX = $RegX
      Compute RegY = $RegY + $Add3Y
    End
    MousePos $NewX, $RegY
    Delay $MDelay
    Rightclick
    Compute NewX = $NewX + $Add2X
    If $Count > $HRow
      Compute NewY = $RegY + $Add2Y
    else
      Compute NewY = $RegY + $Add1Y
    end
    MousePos $NewX, $NewY
    Delay $MDelay
    Rightclick
    Delay $MDelay
    Compute NewX = $NewX + $AddX
    Compute Count = $Count + 1
  End
  SetConst NewX = $RegX
  SetConst Count = 1
End 
 
Procedure Guild
  Compute BeginX = $BeginX - 7
  Compute BeginY = $BeginY + 16
  Compute RegY = $RegY + 16
  Compute RegX = $RegX - 14
  Compute AddX = $AddX - 15
  Compute Add3Y = $Add3Y + 16
  Compute Add1Y = $Add1Y - 16
  Compute WoodBY = $WoodBY + 16
  Compute HeatX = $HeatX - 4
  Compute HeatY = $HeatY + 16
  Compute WoodX = $WoodX - 1
  Compute WoodY = $WoodY + 16
  Compute WaterY = $WaterY + 16
  Compute DangerX = $DangerX - 4
  Compute DangerY = $DangerY + 16
  Compute StatusX = $StatusX - 5
  Compute StatusY = $StatusY + 16
  Set SetAddX = 212
  Set SetAddY = 266
End
 
Procedure HearthTest
  Loop 10
    MousePos $HeatX, $HeatY
    Delay 2000
    
    MousePos $WoodX, $WoodY
    Delay 2000
    
    MousePos $WaterX, $WaterY
    Delay 2000
    
    MousePos $DangerX, $DangerY
    Delay 2000
    
    MousePos $StatusX, $StatusY
    Delay 2000
    
    MousePos $WoodBX, $WoodBY
    Delay 2000
    
    MousePos $WaterBX, $WoodBY
    Delay 2000
  end
  Stop
End
//Written with ACTool 5.3.0 by Anka
Bell Asterisk


carpentry blade v1.0

- it only does about 5000k blades right now working out a different hit tech. to see if i can get it up higher -actools 


delay 4000

// ver 1.0
// make sure you are in double f8 and zoomed all the way in
// pin the tools menu in the upper left corner and force level menu right next to the tools menu
// minimize chat
// face forge so you are facing the blade side of project
// set your mouse pointer to the tip of the lower left prong sticking out of the forge (there is a set of 4, 2 on the left and two on the right)
// screen is 1900x1200 in windowed mode
// alt-tab to macro and press f2
// alt tab back to atitd

constants // this is to store the starting mouse position (StartX and Y) and the recalculated coord. (NewX and Y)

StartX=0 
StartY=0
NewX=0
NewY=0
end


SetConst StartX = {MouseX} // when the macro starts this gets the starting mouse position 
SetConst StartY = {MouseY}



keys c //this selects the wide chisel
delay 500
keys 7 //this sets force level to 7
delay 500


Compute NewX = $StartX + 124 //first hit on blade side left side near left end and in middle of blade side
Compute NewY = $StartY + 41 //these two lines are taking the starting position and adding 124 to X and 41 to Y and storing the result in NewX and Y
MousePos $NewX, $NewY // moves the mouse based on the stored result from above
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 185  //second hit mid way between first hit and middle
Compute NewY = $StartY + 41
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 246 // third hit about middle
Compute NewY = $StartY + 41
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 307 // forth hit mid way between middle and last hit
Compute NewY = $StartY + 41
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 368 // last hit like first near end
Compute NewY = $StartY + 41
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 124 // repeats previous hits but at edge of blade
Compute NewY = $StartY + 63
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 185 // see above
Compute NewY = $StartY + 63
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 246 // see above
Compute NewY = $StartY + 63
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 307 // see above
Compute NewY = $StartY + 63
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 368 // see above
Compute NewY = $StartY + 63
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 124 // repeats the last set but refines the edge more
Compute NewY = $StartY + 63
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 185 // see above
Compute NewY = $StartY + 63
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 246 // see above
Compute NewY = $StartY + 63
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 307 // see above
Compute NewY = $StartY + 63
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 368 // see above
Compute NewY = $StartY + 63
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500



keys b // selects ball peen
delay 500
keys 9 // sets force to 9
delay 500


Compute NewX = $StartX + 140 // first hit on back side of middle tab
Compute NewY = $StartY - 56
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 157 // second hit on back side of top tab
Compute NewY = $StartY - 155
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 373 // repeats on other side of blade
Compute NewY = $StartY - 56
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 351 // repeats on other side of blade
Compute NewY = $StartY - 155
MousePos $NewX, $NewY
delay 500
Leftclick
delay 1000


MousePos 81, 120 // selects shaping mallet  i had to sue mouse position in stead of the keys beacause the last hit causes mouse to be off anvil so they wont work
Leftclick																 // you could make the mouse reposition then use keys that way you dont have to have the menus pinned in a certain spot
delay 1000
MousePos 254, 102 // selects force level 5
Leftclick
delay 1000


Compute NewX = $StartX + 194 // pushes down the ridge on front of blade starting on left
Compute NewY = $StartY + 15
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 260 // see above at middle
Compute NewY = $StartY + 15
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
Compute NewX = $StartX + 332 // see above at right
Compute NewY = $StartY + 15
MousePos $NewX, $NewY
delay 500
Leftclick
delay 500
// should have a blade at about 5000 (im working on refining the hits to make it better)


grass

-actools 


delay 4000

loop 250 //depending on rythmic strength you will need to adjust this
				// if you had no basket this will give you 250 grass x 2=500 grass
				// if you had a basket with good rythmic strength that pulled 3 grass per it would be 3(per pull)x2(once for up and once for down)=6(pulled per loop)x250(loops)=1500 total
		KEYDOWN {UP} 350
                MousePos 226, 66	  //location of the Pick Grass icon (you can hover over it and hit Ctrl-M in ACTools window to find the loc)
		Leftclick
		delay 3300  //this delay has you wait until you pick up the grass - which is important

		KEYDOWN {DOWN} 350
		MousePos 226, 66
		leftclick
		delay 3300
	end

clay

-this is basicly the grass picker modified for the distance of the clay -actools 


delay 4000

loop 25 // << this number x(2)  x(average clay/pick) is what you should end up with
  // keep in mind you will need to have enough water for each run
  KEYDOWN {UP} 1000
  MousePos 226, 66  //location of the clay icon (you can hover over it and hit Ctrl-M in ACTools window to find the loc)
  Leftclick
  delay 1000  //this delay has you wait until you pick up the grass - which is important
  
  KEYDOWN {DOWN} 1000
  MousePos 226, 66
  leftclick
  delay 1000
end

thermometer

-actools 


delay 4000 //a 4 second delay at the front (might need to add more time if you cant switch windows in time)
					 //if you are swapping between programs

//thermo 
//minimize chat, start thermo, set arrow in glory hole.
// alt- tab to macro and press f2
// alt tab back to atitd
//standard heat, might have to adjust this. original was front and it did not work for me so i switched to standard 

 

//puts pipe in hole 
loop 30
keys a 
delay 100
end
//move it back out
loop 7
keys s 
delay 200
end
//rotate it while it heats
loop 21
keys n 
delay 300
end
//rotate and blow
loop 4
keys b 
delay 50
keys n 
delay 100 
end
keys q 
delay 50 
keys u 
delay 50 

	// got over 5000 thermo each time

slate

-ahk 


HotKeySet("^x","Terminate")
HotKeySet("^s","Start")
HotKeySet("^1","Set")
$slatepos = 0
$slatecolour = 0
$test = True
Do

until $test = False



Func Set()
	
	$slatepos = MouseGetPos()
	$slatecolour = PixelGetColor($slatepos[0] ,$slatepos[1])
		EndFunc

Func Start()
if $slatepos = 0 or $slatecolour = 0 Then
	msgbox(0,"Error","You must hover your mouse over the slate icon and press Control + 1 to set the details before starting the Macro")
Else

sleep(500)


dim $test = False





Do 
dim $pixel = PixelGetColor($slatepos[0],$slatepos[1])

if $pixel = $slatecolour Then
		$tempmos = MouseGetPos()
		mouseclick("left" ,$slatepos[0],$slatepos[1],1,0)
		MouseMove($tempmos[0],$tempmos[1],0)
		sleep(100)
endIf		



until $test = True

endIf
EndFunc

Func Terminate()
	Exit 0
EndFunc
Retrieved from "http://www.atitd.org/wiki/t5w/index.php?title=User:Wopper87/links&oldid=20453"