User:Anka/Macros

Macros

Glad to see my old macro's still in use. I even found some updated for Tale 5 but my plan is to update and improve all of my old macro's. The big change since Tale 3 is my resolution. It will take some time to get them all updated and I want to add other resolutions so it's easier for others to use. I'm rewriting the macros for 1920x1080 resolution. Please chat me in game with your preferred resolution and I'll try to get it coded in.

All Macros run with ACTOOL

For those that don't run 1920x1080, go to my old wiki sites to find the originals. I'm not sure if these still work though.

http://www.atitd.org/wiki/tale2/Users/Anka

http://www.atitd.org/wiki/tale3/Users/Anka

But I will be adding more resolutions soon.

I've tested these macros extensively but problems seem to always come up after I post them. Chat me if you have problems.

UPDATE: I have limited time lately so I'm working more on getting all of the macros running on 1920x1080. It's fairly easy to add the resolutions later anyway. I've also been working on more specialized macros lately but things look VERY promising for next tale :) IMPORTANT The big problem with my macros not working for some is because of Venery! It adds an extra line to windows so it's throwing thigs off. I'm in the process of fixing them now.

If you do run into a problem and need to stop the macro.

Hit Alt Tab
Press Alt immediately to select the menu bar on ACTool.
Stop the macro.

IMPORTANT NOTE:

Load ACTool as Administrator.
Autohide your Windows bar. I didn't think this mattered this tale but it does.

When reporting a problem, please include which screen resolution you were using.

Anka's Anvil

My Anvil macro - currently making 7k carp blades. Update: I got tired of working on the veggies so decided to work on this one a bit more. I've solved the 1 problem I had and the macro works %100 of the time. It's only in 1920x1080 at the moment and I want to make is so it works on more anvil orientations and add some different resolutions. Currently out of 30 carp blades, the lowest was 7100.

Barley

This is the old Barly macro I used in T2 and T3. It was written by Draeton in Tale 2. I have updated it but very little remains of the original code. I've done a major rewrite, added 3 resolutions and it's about 1/3 or less of it's original size.

Some key notes...

This is still considered beta - All is working but I want to add a few more features.
You need to have a "barley" plant window pinned open in your far upper right corner.
Max barley beds for 1024x768 is 8
Max barley beds for others is 10 - It will probably plant more but you will get out of range from other beds. Plus it throws the timing off.
No Weed Killer - This is a brute force macro. Don't expect the same results each time.
Don't use the Batch feature - Unless you have a ton of water and dont need refilling, the macro does not reset your position due to different about of beds for each resolution. I'll add this later.
Have a clear area to the right of your toon for planting.

Some things still need fixing. I have a few more plans for this that will be added later.

Barrel Vice

Works perfectly

Beer Kettle

Tale 3 macro. Works but crude. Adding menu and options.

Carpentry Bench

Works perfectly. Adding more options.

Casting Box

Just putting the final touches on it.

Charcoal Hearth

This is my old macro from tale 2 converted to 1920x1080. Added Regulator option instead of always running at 1 and also added a Venery option. I may add more resolutions later.

Anka

Charcoal Oven

I have this one converted to 1920x1080 and so far have ran 7 ovens. It's still a bit picky, sometimes it works perfectly and others it goes crazy about 30% of the time. Still working out fixes.

Update Charcoal on ovens are a real thorn in my side :) You fix a problem but some things are random on ovens that I can't seem to get it 100% like I want it right now. Known issues: I still get a lost oven from time to time due to some ovens burn faster than others. My goal was to get up to 15 ovens but I'm not sure I want to inflict that on myself at this moment. I'm also trying to play more of the game this tale :)

I'm going to post this macro in what I call "unfinished" state. It works great but there are things that I want to address and add to the macro to get it to 100% sooner or later. Personally I've been just running 5 ovens at a time to get a cool 1k cc. I've ran 7 but the timing is tricky and I did not put the time in to get those tuned.

The macro is just written in 1920x1080 so far but I'll add other resolutions later. It does have a setup option. stack all of your ovens in the top left corner. The setup routine will place your windows for you. It has a venery option also for those that are on the venery test. My suggestions are:

Stack your windows in a way to get your fastest burning ovens first.
I carry about 300 wood per oven.
Have a bunch of water, I have not actually averaged out how many you need. maybe 20 per oven.
Make sure window's bar is on autohide as always.

I don't think this macro is bad on wood yet I have endless wood so it's not a concern. The only time it really waste wood is when a later oven finishes before the first one. The macro will continue to add wood to all ovens later in the stack. I have a fix for this, just have not coded it yet.

Clay and Slate

Old macro from T2 or T3 with slight edits. Place pointer over Clay or Slate Icon, Alt Tab without moving the mouse. Press F2. Simply walk and it will pick up what you set. Alt tab to stop.

Anka

FirePit64

This is my first AutoHotKey macro to run firepits. It will only run 1 firepit so far but just give me some time. There are a few more things I want to do with it before I call it complete but I have tested it up to 30 stokes without a problem. I was getting some misses earlier but that was an earlier edit.

It's an exe file so simply run it.
Resolution 1920x1080. Have not tested it in other resolutions
Double F8 view zoomed all the way in.
Chat minimized.

Once you run it, set how many stokes you want to do, you can either select a value from the drop down or type in a number. Middle mouse click on the upper left portion of the log that is pointing north as in the marked picture above. I stood north of the firepit. Once you click on this spot, do not move your character. Click start and it will find the starting location and a msgbox will appear. It is here that you make sure your firepit is loaded, light it then alt tab to see the message box again, click yes and it will do its thing. I hope you enjoy. This version is a 64 bit version, you can find a 32 bit version here

Flax v.5.0.3

Updated 02/13/11

This one is a monster. I've made some changes since T3. It's the old macro re-done with some improvements. You may have problems with timing if you are on an older PC but I don't think it will be an issue. It plants seed beds, then will plant enough flax to leave you with the starting seeds of 21. Uses water or not and can dump flax into a warehouse or into water to rot. This macro does not use hotkeys so you can chat during long flax runs. :)

I've added new resolutions! :) So far it works in 1920x1080, 1360x768 and 1280x1024. Please leave me comments listing which resolution you want added. If you are planting in a diagonal line, you have this set wrong. :)

Just as a warning, the first thing the macro does is zoom out a bit. Don't be alarmed. Make sure camera speed is at the default setting. I just added menu options to control the camera. The flax beds should be snug together in a group. I'll add some pictures at some point.

I did experience the problem with zooming out too far. No idea why it zooms so much today. Just use the menu item to slow it down.

You need to get the settings right when you start. Once you have those set, the macro will save them. Try starting with

Job: Both
Seed Plants: 10
Batch: whatever you want
Pick Rounds:1
Weed #: 3 Change this for new seeds. 3 is for 2 weedings and a watering.
Seeds/Pick:1 Change this based on the flax seed.
Seeds in Inventory:42 I need to work on this some more. Leave at 42

Unzoom Time: 450 I personally use 475
Zoom Time: 1000

Known Issues:

Macro doesn't detect water icon. I'm working on this.
I need to rework the math at the beginning that deals with seeds. Only thing that will happen if you try using it like it's intended is that it may miscalc your seeds and you could run out while planting. Keep some extra seeds in a safe place so it doesn't use your last seed.

Troubleshooting:

If your beds have space between them when planting - You need to lower the Unzoom number untill the beds are snug. Beds plant in a diagonal line - Wrong resolution selected or windows task bar has been known to throw off the coords. Autohide it.

Fixed in this release:

Rot feature should work now, before it would work if your menu was exactly like mine. It now reads the menu correctly on 2 different toons in all resolutions for me. For the first batch of flax, the rot feature will be slower than normal because it's finding what it needs in the menu. Later rounds don't have to do this searching.
Venery Option added: If you have "Test...." in your menus when clicking on things, it throws coords off, just sellect this option.

Glazier's Bench

Works perfectly for all task and bench types.

Glory Hole

Same thermometer macro from T2 or T3. Adding other projects.

Kettles

Another updated macro from tale 2. Resolutions 1920x1080 and 1024x768(Original). Chat me if you find problems. Instructions at the top of the macro.

Master's Casting Box

Working, just adding all options.

Paper Press

Works Perfectly. Runs 20 Paper presses.

Pottery Wheel

Works perfectly for as many you can see on screen.

Quarry

Raeli Oven

Map and Burn

Rock Saw

Works perfectly.

Multi Tool

Updated from tale 2 and should work in all resolutions. Will do Coconuts, Digs, Dirt, Hackling Rake, Hookah, Limestone and Loom. Make sure your skills tab is selected and all stats are visable.

Veggies

I dug up my old veggie macro and changed into my old resolution of 1024x768. I took out the color detection like I'm doing with all of my macros. Color macros work for some but not for others.

As some of you may remember, this is the macro that I did not release in T3. It has not been tested %100 so there may be some fixes needed but all veggies have been grown in all resolution settings on my machine. You may even be able to use resolutions not listed if they are close enough to one on the list.

UPDATE: I've finished making the changes I wanted to the macro. I'm sure people will find things I need to address but I've tested it in all resolutions with and without aquaduct. As the onion part is working, I have made some changes to add more plants. I was up to 25 but there is not enough time to handle 25 so I'm scaling it back a bit. The current posting has only been tested with 4 plants but I'll be working on that.

Things to do... A bunch of these are already fixed but I'll go through and verify once more. I'll update on each change.

Veggie	Fixed	1920x1080	1380x768	1280x1024	1024x768
Cabbage
Carrots
Garlic
Leeks
Onions
Watermelon
Pepper
Cucumber
Eggplant

Fixed = Venery and Aquaduct verified

Enjoy. Anka

Comments

Please let me know what you think and let me know what you would like to see.

Hey Anka! I have been trying to use your firepit macro and i keep running into the same problem no matter what i do. After i middle click the north piece of wood as in the picture above, but as soon as i do that and hit start the macro starts right clicking my player over and over and over. After doing this for 30+ times it will popup with the box asking me to light the fire.